Cansat
/
esp32_Adafruit_GPS
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix #14 by fixing compilation for Arduino Due, and updating due_parsing example text to clarify connections.

This commit is contained in:
Tony DiCola 2014-08-07 13:08:27 -07:00
parent 11cb409ead
commit 4b2006754e
2 changed files with 11 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Adafruit_GPS.cpp
View File

@ -9,7 +9,10 @@ Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, check license.txt for more information
All text above must be included in any redistribution
****************************************/
#include <SoftwareSerial.h>
#ifdef __AVR__
// Only include software serial on AVR platforms (i.e. not on Due).
#include <SoftwareSerial.h>
#endif
#include <Adafruit_GPS.h>
// how long are max NMEA lines to parse?

31
examples/due_parsing/due_parsing.ino
View File

@ -13,30 +13,13 @@
#include <Adafruit_GPS.h>
#ifdef __AVR__
#include <SoftwareSerial.h>
#endif
// If you're using a GPS module:
// Connect the GPS Power pin to 5V
// Connect the GPS Ground pin to ground
// If using software serial (sketch example default):
// Connect the GPS TX (transmit) pin to Digital 3
// Connect the GPS RX (receive) pin to Digital 2
// If using hardware serial (e.g. Arduino Mega):
// Connect the GPS TX (transmit) pin to Arduino RX1, RX2 or RX3
// Connect the GPS RX (receive) pin to matching TX1, TX2 or TX3
// If you're using the Adafruit GPS shield, change
// SoftwareSerial mySerial(3, 2); -> SoftwareSerial mySerial(8, 7);
// and make sure the switch is set to SoftSerial
// If using software serial, keep this line enabled
// (you can change the pin numbers to match your wiring):
//SoftwareSerial mySerial(3, 2);
// If using hardware serial (e.g. Arduino Mega, Leonardo, Due), comment
// out the above line and enable this line instead:
// This sketch is ONLY for the Arduino Due!
// You should make the following connections with the Due and GPS module:
// GPS power pin to Arduino Due 3.3V output.
// GPS ground pin to Arduino Due ground.
// For hardware serial 1 (recommended):
// GPS TX to Arduino Due Serial1 RX pin 19
// GPS RX to Arduino Due Serial1 TX pin 18
#define mySerial Serial1
Adafruit_GPS GPS(&mySerial);