746 lines
30 KiB
C++
746 lines
30 KiB
C++
// **********************************************************************************************************
|
|
// MightyHat gateway base unit sketch that works with MightyHat with onboard RFM69W/RFM69HW
|
|
// This will relay all RF data over serial to the host computer (RaspberryPi, PC etc) and vice versa
|
|
// http://LowPowerLab.com/MightyHat
|
|
// Copyright http://www.LowPowerLab.com (2015)
|
|
// Also see http://LowPowerLab.com/gateway
|
|
//**********************************************************************************
|
|
// License
|
|
// **********************************************************************************
|
|
// This program is free software; you can redistribute it
|
|
// and/or modify it under the terms of the GNU General
|
|
// Public License as published by the Free Software
|
|
// Foundation; either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will
|
|
// be useful, but WITHOUT ANY WARRANTY; without even the
|
|
// implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
// PARTICULAR PURPOSE. See the GNU General Public
|
|
// License for more details.
|
|
//
|
|
// You should have received a copy of the GNU General
|
|
// Public License along with this program.
|
|
// If not, see <http://www.gnu.org/licenses/>.
|
|
//
|
|
// Licence can be viewed at
|
|
// http://www.gnu.org/licenses/gpl-3.0.txt
|
|
//
|
|
// Please maintain this license information along with authorship
|
|
// and copyright notices in any redistribution of this code
|
|
// **********************************************************************************
|
|
|
|
#include <RFM69.h> //get it here: http://github.com/lowpowerlab/rfm69
|
|
#include <RFM69_ATC.h> //get it here: https://www.github.com/lowpowerlab/rfm69
|
|
#include <SPIFlash.h> //get it here: http://github.com/lowpowerlab/spiflash
|
|
#include <WirelessHEX69.h> //get it here: https://github.com/LowPowerLab/WirelessProgramming
|
|
#include <SPI.h> //comes with Arduino IDE (www.arduino.cc)
|
|
#include "U8glib.h" //https://bintray.com/olikraus/u8glib/Arduino
|
|
//u8g compared to adafruit lib: https://www.youtube.com/watch?v=lkWZuAnHa2Y
|
|
//draing bitmaps: https://www.coconauts.net/blog/2015/01/19/easy-draw-bitmaps-arduino/
|
|
//*****************************************************************************************************************************
|
|
// ADJUST THE SETTINGS BELOW DEPENDING ON YOUR HARDWARE/SCENARIO !
|
|
//*****************************************************************************************************************************
|
|
#define NODEID 1 //the gateway has ID=1
|
|
#define NETWORKID 100 //all nodes on the same network can talk to each other
|
|
#define FREQUENCY RF69_915MHZ //Match this with the version of your Moteino! (others: RF69_433MHZ, RF69_868MHZ)
|
|
//#define FREQUENCY_EXACT 917000000 //uncomment and set to a specific frequency in Hz, if commented the center frequency is used
|
|
#define ENCRYPTKEY "sampleEncryptKey" //has to be same 16 characters/bytes on all nodes, not more not less!
|
|
#define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W!
|
|
#define ENABLE_ATC //comment out this line to disable AUTO TRANSMISSION CONTROL //more here: http://lowpowerlab.com/blog/2015/11/11/rfm69_atc-automatic-transmission-control/
|
|
//#define ENABLE_WIRELESS_PROGRAMMING //comment out this line to disable Wireless Programming of this gateway node
|
|
#define ENABLE_LCD //comment this out if you don't have or don't want to use the LCD
|
|
//*****************************************************************************************************************************
|
|
#define ACK_TIME 30 // # of ms to wait for an ack
|
|
#define SERIAL_BAUD 115200
|
|
#define DEBUG_EN //comment out if you don't want any serial verbose output (keep out in real use)
|
|
|
|
#define BTN_LED_RED 9
|
|
#define BTN_LED_GRN 6 // This will indicate when Pi has power
|
|
#define POWER_LED_RED() { digitalWrite(BTN_LED_RED, HIGH); digitalWrite(BTN_LED_GRN, LOW); }
|
|
#define POWER_LED_GRN() { digitalWrite(BTN_LED_RED, LOW); digitalWrite(BTN_LED_GRN, HIGH); }
|
|
#define POWER_LED_ORANGE() { digitalWrite(BTN_LED_RED, HIGH); digitalWrite(BTN_LED_GRN, HIGH); }
|
|
#define POWER_LED_OFF() { digitalWrite(BTN_LED_RED, LOW); digitalWrite(BTN_LED_GRN, LOW); }
|
|
#define ON 1
|
|
#define OFF 0
|
|
|
|
#define FLASH_CS 8
|
|
|
|
#define BUZZER 5 // Buzzer attached to D5 (PWM pin required for tones)
|
|
#define BUTTON A2 // Power button pin
|
|
#define BUTTON1 A4 // Backlight control button
|
|
#define BUTTON2 A5 // Backlight control button
|
|
#define LATCH_EN 4
|
|
#define LATCH_VAL 7
|
|
#define SIG_SHUTOFF A3 // Signal to Pi to ask for a shutdown
|
|
#define SIG_BOOTOK A6 // Signal from Pi that it's OK to cutoff power
|
|
// !!NOTE!! Originally this was D7 but it was moved to A0 at least temporarily.
|
|
// On MightyBoost R1 you need to connect D7 and A0 with a jumper wire.
|
|
// The explanation for this is given here: http://lowpowerlab.com/mightyboost/#source
|
|
#define BATTERYSENSE A7 // Sense VBAT_COND signal (when powered externally should read ~3.25v/3.3v (1000-1023), when external power is cutoff it should start reading around 2.85v/3.3v * 1023 ~= 880 (ratio given by 10k+4.7K divider from VBAT_COND = 1.47 multiplier)
|
|
// hence the actual input voltage = analogRead(A7) * 0.00322 (3.3v/1024) * 1.47 (10k+4.7k voltage divider ratio)
|
|
// when plugged in this should be 4.80v, nothing to worry about
|
|
// when on battery power this should decrease from 4.15v (fully charged Lipoly) to 3.3v (discharged Lipoly)
|
|
// trigger a shutdown to the target device once voltage is around 3.4v to allow 30sec safe shutdown
|
|
|
|
#define BATTERY_VOLTS(analog_reading) analog_reading * 0.00322 * 1.51 // 100/66 is the inverse ratio of the voltage divider ( Batt > 1MEG > A7 > 2MEG > GND )
|
|
#define LOWBATTERYTHRESHOLD 3.5 // a shutdown will be triggered to the target device when battery voltage drops below this (Volts)
|
|
#define CHARGINGTHRESHOLD 4.3
|
|
#define RESETHOLDTIME 500 // Button must be hold this many mseconds before a reset is issued (should be much less than SHUTDOWNHOLDTIME)
|
|
#define SHUTDOWNHOLDTIME 2000 // Button must be hold this many mseconds before a shutdown sequence is started (should be much less than ForcedShutoffDelay)
|
|
#define ShutoffTriggerDelay 6000 // will start checking the SIG_BOOTOK line after this long
|
|
#define RESETPULSETIME 500 // When reset is issued, the SHUTOFF signal is held HIGH this many ms
|
|
#define ForcedShutoffDelay 7500 // when SIG_BOOTOK==0 (PI in unknown state): if button is held
|
|
// for this long, force shutdown (this should be less than RecycleTime)
|
|
#define ShutdownFinalDelay 4500 // after shutdown signal is received, delay for this long
|
|
// to allow all PI LEDs to stop activity (pulse LED faster)
|
|
#define RecycleTime 60000 // window of time in which SIG_BOOTOK is expected to go HIGH
|
|
// should be at least 3000 more than Min
|
|
// if nothing happens after this window, if button is
|
|
// still pressed, force cutoff power, otherwise switch back to normal ON state
|
|
#define BATTERYREADINTERVAL 2000
|
|
|
|
#ifdef DEBUG_EN
|
|
#define DEBUG(input) Serial.print(input)
|
|
#define DEBUGln(input) Serial.println(input)
|
|
#else
|
|
#define DEBUG(input)
|
|
#define DEBUGln(input)
|
|
#endif
|
|
|
|
//general variables
|
|
byte ackCount=0;
|
|
String inputstr;
|
|
byte inputLen=0;
|
|
char RSSIstr[] = "-100dBm";
|
|
char temp[64];
|
|
|
|
byte lastValidReading = 1;
|
|
unsigned long lastValidReadingTime = 0;
|
|
unsigned long NOW=0;
|
|
byte PowerState = OFF;
|
|
long lastPeriod = -1;
|
|
int rssi=0;
|
|
float systemVoltage = 5;
|
|
float systemVoltagePrevious = 5;
|
|
boolean batteryLow=false;
|
|
boolean batteryLowShutdown=false;
|
|
|
|
SPIFlash flash(FLASH_CS, 0xEF30); //EF30 for 4mbit Windbond FLASH MEM
|
|
#ifdef ENABLE_ATC
|
|
RFM69_ATC radio;
|
|
#else
|
|
RFM69 radio;
|
|
#endif
|
|
|
|
//******************************************** BEGIN LCD STUFF ********************************************************************************
|
|
char lcdbuff[80];
|
|
#ifdef ENABLE_LCD
|
|
#define PIN_LCD_CS LATCH_VAL //Pin 2 on LCD, lcd CS is shared with Latch value pin since they are both outputs and never HIGH at the same time
|
|
#define PIN_LCD_RST A1 //Pin 1 on LCD
|
|
#define PIN_LCD_DC A0 //Pin 3 on LCD
|
|
#define PIN_LCD_LIGHT 3 //Backlight pin
|
|
#define xbmp_logo_width 30
|
|
#define xbmp_logo_height 27
|
|
#define BACKLIGHTLEVELS 5 //5 levels gives a nice round number that allows full brightness
|
|
void LCD_BACKLIGHT(byte level) { if (level>BACKLIGHTLEVELS) level=BACKLIGHTLEVELS; analogWrite(PIN_LCD_LIGHT, 255-level*255/BACKLIGHTLEVELS); }
|
|
byte backlightLevel=BACKLIGHTLEVELS; //max at startup
|
|
|
|
const uint8_t xbmp_logo[] PROGMEM = {
|
|
0xe0, 0xff, 0xff, 0x01, 0xf0, 0xff, 0xff, 0x03, 0x08, 0x00, 0x00, 0x04,
|
|
0x06, 0x00, 0x00, 0x18, 0xc3, 0x03, 0xf0, 0x30, 0x23, 0x04, 0x08, 0x31,
|
|
0x23, 0x04, 0x08, 0x31, 0x23, 0x0c, 0x0c, 0x31, 0xc3, 0x13, 0xf2, 0x30,
|
|
0x03, 0xe0, 0x01, 0x30, 0x03, 0xe0, 0x01, 0x30, 0xc3, 0xe3, 0xf1, 0x30,
|
|
0x23, 0xe4, 0x09, 0x31, 0x23, 0xfc, 0x0f, 0x31, 0x23, 0xe4, 0x09, 0x31,
|
|
0xc3, 0xe3, 0xf1, 0x30, 0x03, 0xe0, 0x01, 0x30, 0x03, 0xe0, 0x01, 0x30,
|
|
0xc3, 0x13, 0xf2, 0x30, 0x23, 0x0c, 0x0c, 0x31, 0x23, 0x04, 0x08, 0x31,
|
|
0x23, 0x04, 0x08, 0x31, 0xc3, 0x03, 0xf0, 0x30, 0x06, 0x00, 0x00, 0x18,
|
|
0x08, 0x00, 0x00, 0x04, 0xf0, 0xff, 0xff, 0x03, 0xe0, 0xff, 0xff, 0x01 };
|
|
|
|
#define xbmp_batt_width 9
|
|
#define xbmp_batt_height 6
|
|
const uint8_t xbmp_batt_c[] PROGMEM = { 0xff, 0x00, 0xbf, 0x00, 0x9f, 0x01, 0x8f, 0x01, 0x87, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_x[] PROGMEM = { 0xff, 0x00, 0xa5, 0x00, 0x81, 0x01, 0x99, 0x01, 0xa5, 0x00, 0xff, 0x00 };
|
|
|
|
const uint8_t xbmp_batt_0[] PROGMEM = { };
|
|
const uint8_t xbmp_batt_1[] PROGMEM = { 0xff, 0x00, 0x83, 0x00, 0x83, 0x01, 0x83, 0x01, 0x83, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_2[] PROGMEM = { 0xff, 0x00, 0x87, 0x00, 0x87, 0x01, 0x87, 0x01, 0x87, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_3[] PROGMEM = { 0xff, 0x00, 0x8f, 0x00, 0x8f, 0x01, 0x8f, 0x01, 0x8f, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_4[] PROGMEM = { 0xff, 0x00, 0x9f, 0x00, 0x9f, 0x01, 0x9f, 0x01, 0x9f, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_5[] PROGMEM = { 0xff, 0x00, 0xbf, 0x00, 0xbf, 0x01, 0xbf, 0x01, 0xbf, 0x00, 0xff, 0x00 };
|
|
const uint8_t xbmp_batt_6[] PROGMEM = { 0xff, 0x00, 0xff, 0x00, 0xff, 0x01, 0xff, 0x01, 0xff, 0x00, 0xff, 0x00 };
|
|
|
|
#define xbmp_rssi_width 7
|
|
#define xbmp_rssi_height 6
|
|
const uint8_t xbmp_rssi_1[] PROGMEM = { 0x40, 0x10, 0x00, 0x04, 0x04, 0x05 };
|
|
const uint8_t xbmp_rssi_2[] PROGMEM = { 0x40, 0x10, 0x10, 0x14, 0x14, 0x15 };
|
|
const uint8_t xbmp_rssi_3[] PROGMEM = { 0x40, 0x50, 0x50, 0x54, 0x54, 0x55 };
|
|
const uint8_t xbmp_rssi_0[] PROGMEM = { 0x40, 0x10, 0x00, 0x04, 0x00, 0x01 };
|
|
|
|
U8GLIB_PCD8544 lcd(PIN_LCD_CS, PIN_LCD_DC, PIN_LCD_RST); //hardware SPI
|
|
//U8GLIB_PCD8544 lcd(SCK, MOSI, PIN_LCD_CS, PIN_LCD_DC , PIN_LCD_RST); //software SPI
|
|
|
|
//******************************************** LCD FUNCTIONS ********************************************************************************
|
|
void drawLogo() {
|
|
lcd.firstPage();
|
|
do {
|
|
lcd.drawXBMP((84-xbmp_logo_width)/2, (48-xbmp_logo_height)/2, xbmp_logo_width, xbmp_logo_height, xbmp_logo); //tutorial: https://www.coconauts.net/blog/2015/01/19/easy-draw-bitmaps-arduino/
|
|
} while(lcd.nextPage());
|
|
}
|
|
|
|
void clearDisplay() {
|
|
lcd.firstPage();
|
|
do{}while(lcd.nextPage());
|
|
}
|
|
|
|
void refreshLCD() {
|
|
noInterrupts(); //while messing with LCD need to pause interrups from radio to avoid SPI conflicts!
|
|
byte lcdwidth = lcd.getWidth();
|
|
byte lcdheight = lcd.getHeight();
|
|
char c;
|
|
byte i,pos,swidth;
|
|
byte * bmpPtr;
|
|
|
|
//u8glib picture loop
|
|
lcd.firstPage();
|
|
do {
|
|
lcd.setFont(u8g_font_profont10);
|
|
lcd.setFontRefHeightText();
|
|
lcd.setFontPosTop();
|
|
byte fontheight = lcd.getFontAscent()-lcd.getFontDescent();
|
|
char * textp = lcdbuff;
|
|
byte textLength = strlen(textp);
|
|
byte line=0;
|
|
byte done = false;
|
|
|
|
//this section splits the textp string into chunks that fit on the screen width and prints each to a new line
|
|
while(textLength && !done)
|
|
{
|
|
for (i=1;i<=textLength;i++)
|
|
{
|
|
c = textp[i];
|
|
textp[i]=0;
|
|
swidth = lcd.getStrWidth(textp);
|
|
textp[i] = c;
|
|
if (c=='\n') { pos = i; break; } //newline char found, skip it and go to next line
|
|
if (swidth > lcdwidth) { pos = i-1; break; } //line is full, go to next line
|
|
else if (i==textLength) { done = true; }
|
|
}
|
|
if (!done)
|
|
{
|
|
c = textp[pos];
|
|
textp[pos]=0;
|
|
}
|
|
lcd.drawStr(0, line * fontheight, textp);
|
|
if (done) break;
|
|
textp[pos] = c;
|
|
textp += pos;
|
|
textLength -= pos;
|
|
line++;
|
|
}
|
|
|
|
lcd.setFontPosBaseline();
|
|
|
|
//print battery voltage and icon
|
|
if (systemVoltage >= 4.3) bmpPtr = (byte*)xbmp_batt_c;
|
|
else if (systemVoltage >= 4) bmpPtr = (byte*)xbmp_batt_6;
|
|
else if (systemVoltage >= 3.9) bmpPtr = (byte*)xbmp_batt_5;
|
|
else if (systemVoltage >= 3.8) bmpPtr = (byte*)xbmp_batt_4;
|
|
else if (systemVoltage >= 3.7) bmpPtr = (byte*)xbmp_batt_3;
|
|
else if (systemVoltage >= 3.6) bmpPtr = (byte*)xbmp_batt_2;
|
|
else if (systemVoltage >= 3.5) bmpPtr = (byte*)xbmp_batt_1;
|
|
else bmpPtr = (byte*)xbmp_batt_x;
|
|
lcd.drawXBMP(lcdwidth-xbmp_batt_width, lcdheight-xbmp_batt_height, xbmp_batt_width, xbmp_batt_height, bmpPtr);
|
|
|
|
lcd.setPrintPos(54, 48);
|
|
if (systemVoltage >= CHARGINGTHRESHOLD)
|
|
lcd.print("CHRG");
|
|
else
|
|
lcd.print(systemVoltage); //sprintf(BATvstr, "%sv", BATstr);
|
|
|
|
lcd.setPrintPos(0, 40);
|
|
uint16_t uptimeSeconds = millis()/1000;
|
|
if (uptimeSeconds<60)
|
|
sprintf(temp, "up:%us", uptimeSeconds);
|
|
else
|
|
sprintf(temp, "up:%um", uptimeSeconds/60);
|
|
lcd.print(temp);
|
|
|
|
lcd.setPrintPos(45, 40);
|
|
sprintf(temp, "RAM:%u", checkFreeRAM());
|
|
lcd.print(temp);
|
|
|
|
//print rssi and icon
|
|
if (rssi > -70) bmpPtr = (byte*)xbmp_rssi_3;
|
|
else if (rssi > -80) bmpPtr = (byte*)xbmp_rssi_2;
|
|
else if (rssi > -90) bmpPtr = (byte*)xbmp_rssi_1;
|
|
else if (rssi > -95) bmpPtr = (byte*)xbmp_rssi_0;
|
|
lcd.drawXBMP(0, lcdheight-xbmp_rssi_height, xbmp_rssi_width, xbmp_rssi_height, bmpPtr);
|
|
lcd.drawStr(xbmp_rssi_width+1, 48, RSSIstr);
|
|
} while(lcd.nextPage());
|
|
digitalWrite(PIN_LCD_CS, HIGH);
|
|
interrupts(); //re-enable interrupts
|
|
}
|
|
#endif
|
|
//******************************************** END LCD STUFF ********************************************************************************
|
|
|
|
//******************************************** MESSAGE HISTORY ******************************************************************************
|
|
#define MSG_MAX_LEN 32 //truncate message at 32 chars since most are shorter than that anyway
|
|
#define HISTORY_LEN 10 //hold this many past messages (IMPORTANT: 10 records needs about 330 bytes of RAM so be careful about making this too large)
|
|
typedef struct {
|
|
char data[MSG_MAX_LEN];
|
|
int rssi;
|
|
} Message;
|
|
Message * messageHistory = new Message[HISTORY_LEN];
|
|
byte lastMessageIndex = HISTORY_LEN;
|
|
byte currMessageIndex = HISTORY_LEN;
|
|
byte historyLength = 0;
|
|
|
|
void saveToHistory(char * msg, int rssi)
|
|
{
|
|
byte length = strlen(msg);
|
|
byte i = 0;
|
|
if (lastMessageIndex >= HISTORY_LEN-1) lastMessageIndex = 0;
|
|
else lastMessageIndex++;
|
|
if (historyLength < HISTORY_LEN) historyLength++;
|
|
currMessageIndex = historyLength-1; //reset history pointer back to latest message
|
|
|
|
for (; i<(MSG_MAX_LEN-1) && (i < length); i++)
|
|
messageHistory[lastMessageIndex].data[i] = msg[i];
|
|
|
|
messageHistory[lastMessageIndex].data[i] = '\0'; //terminate string
|
|
messageHistory[lastMessageIndex].rssi = rssi;
|
|
}
|
|
//******************************************** END MESSAGE HISTORY **************************************************************************
|
|
|
|
//parse through any serial commands from the host (Pi)
|
|
void handleSerialInput() {
|
|
inputLen = readSerialLine(temp, 10, 64, 10); //readSerialLine(char* input, char endOfLineChar=10, byte maxLength=64, uint16_t timeout=10);
|
|
|
|
if (inputLen > 0)
|
|
{
|
|
inputstr = String(temp);
|
|
inputstr.toUpperCase();
|
|
if (inputstr.equals("BEEP")) Beep(5, false);
|
|
if (inputstr.equals("BEEP2")) Beep(10, true);
|
|
if (inputstr.equals("RAM")) { DEBUG(F("Free RAM bytes: "));DEBUGln(checkFreeRAM()); }
|
|
|
|
if (inputstr.equals("KEY?"))
|
|
{
|
|
Serial.print(F("ENCRYPTKEY:"));
|
|
Serial.print(ENCRYPTKEY);
|
|
}
|
|
|
|
byte targetId = inputstr.toInt(); //extract ID if any
|
|
byte colonIndex = inputstr.indexOf(":"); //find position of first colon
|
|
if (targetId > 0) inputstr = inputstr.substring(colonIndex+1); //trim "ID:" if any
|
|
if (targetId > 0 && targetId != NODEID && targetId != RF69_BROADCAST_ADDR && colonIndex>0 && colonIndex<4 && inputstr.length()>0)
|
|
{
|
|
inputstr.getBytes((byte*)temp, 61);
|
|
if (radio.sendWithRetry(targetId, (byte*)temp, inputstr.length()))
|
|
Serial.println(F("ACK:OK"));
|
|
else
|
|
Serial.println(F("ACK:NOK"));
|
|
}
|
|
}
|
|
}
|
|
|
|
void Blink(byte PIN, int DELAY_MS)
|
|
{
|
|
pinMode(PIN, OUTPUT);
|
|
digitalWrite(PIN,HIGH);
|
|
delay(DELAY_MS);
|
|
digitalWrite(PIN,LOW);
|
|
}
|
|
|
|
void setupPowerControl(){
|
|
pinMode(BUTTON, INPUT_PULLUP);
|
|
pinMode(SIG_BOOTOK, INPUT);
|
|
pinMode(SIG_SHUTOFF, OUTPUT);
|
|
pinMode(BTN_LED_RED, OUTPUT);
|
|
pinMode(BTN_LED_GRN, OUTPUT);
|
|
pinMode(LATCH_EN, OUTPUT);
|
|
digitalWrite(LATCH_EN, LOW);
|
|
pinMode(PIN_LCD_CS, OUTPUT);
|
|
digitalWrite(PIN_LCD_CS, HIGH);
|
|
pinMode(LATCH_VAL, OUTPUT);
|
|
pinMode(BUTTON1, INPUT_PULLUP);
|
|
pinMode(BUTTON2, INPUT_PULLUP);
|
|
pinMode(BATTERYSENSE, INPUT);
|
|
digitalWrite(SIG_SHUTOFF, LOW);//added after sudden shutdown quirks, DO NOT REMOVE!
|
|
}
|
|
|
|
void handlePowerControl() {
|
|
byte reading = digitalRead(BUTTON);
|
|
NOW = millis();
|
|
digitalWrite(SIG_SHUTOFF, LOW);//added after sudden shutdown quirks, DO NOT REMOVE!
|
|
|
|
//artificial power ON after a low battery shutdown
|
|
if (PowerState == OFF && batteryLowShutdown && systemVoltage >= CHARGINGTHRESHOLD)
|
|
reading = HIGH;
|
|
|
|
if ((PowerState == ON && batteryLow) || (reading != lastValidReading && NOW - lastValidReadingTime > 200))
|
|
{
|
|
lastValidReading = reading;
|
|
lastValidReadingTime = NOW;
|
|
|
|
if ((PowerState == ON && batteryLow) || reading == LOW)
|
|
{
|
|
radio.sleep();
|
|
//make sure the button is held down for at least 'RESETHOLDTIME' before taking action (this is to avoid accidental button presses and consequently Pi shutdowns)
|
|
NOW = millis();
|
|
while (!batteryLow && (PowerState == ON && millis()-NOW < RESETHOLDTIME)) { delay(10); if (digitalRead(BUTTON) != 0) return; }
|
|
|
|
//RESETHOLDTIME is satisfied, now check if button still held until SHUTDOWNHOLDTIME is satisfied
|
|
POWER_LED_ORANGE(); //make the button LED orange to show something's going on
|
|
while (!batteryLow && (PowerState == ON && millis()-NOW < SHUTDOWNHOLDTIME))
|
|
{
|
|
if (digitalRead(BUTTON) != 0)
|
|
{
|
|
if (BOOTOK()) //SIG_BOOTOK is HIGH so Pi is running the shutdowncheck.sh script, ready to intercept the RESET PULSE
|
|
{
|
|
#ifdef ENABLE_LCD
|
|
sprintf(lcdbuff, "Rebooting Pi..");
|
|
refreshLCD();
|
|
#endif
|
|
digitalWrite(SIG_SHUTOFF, HIGH);
|
|
delay(RESETPULSETIME);
|
|
digitalWrite(SIG_SHUTOFF, LOW);
|
|
//DEBUGln("SIG_SHUTOFF - HIGH>delay>LOW");
|
|
|
|
NOW = millis();
|
|
boolean recycleDetected=false;
|
|
while (millis()-NOW < RecycleTime) //blink LED while waiting for BOOTOK to go high
|
|
{
|
|
//blink 3 times and pause
|
|
POWER_LED_OFF(); //digitalWrite(POWER_LED, LOW);
|
|
delay(100);
|
|
POWER_LED_ORANGE(); //digitalWrite(POWER_LED, HIGH);
|
|
delay(100);
|
|
POWER_LED_OFF(); //digitalWrite(POWER_LED, LOW);
|
|
delay(100);
|
|
POWER_LED_ORANGE(); //digitalWrite(POWER_LED, HIGH);
|
|
delay(100);
|
|
POWER_LED_OFF(); //digitalWrite(POWER_LED, LOW);
|
|
delay(100);
|
|
POWER_LED_ORANGE(); //digitalWrite(POWER_LED, HIGH);
|
|
delay(500);
|
|
|
|
if (!BOOTOK()) recycleDetected = true;
|
|
else if (BOOTOK() && recycleDetected)
|
|
{
|
|
#ifdef ENABLE_LCD
|
|
sprintf(lcdbuff, "Reboot OK!");
|
|
refreshLCD();
|
|
#endif
|
|
return;
|
|
}
|
|
}
|
|
return; //reboot pulse sent but it appears a reboot failed; exit all checks
|
|
}
|
|
else return; //ignore everything else (button was held for RESETHOLDTIME, but SIG_BOOTOK was LOW)
|
|
}
|
|
}
|
|
|
|
//SIG_BOOTOK must be HIGH when Pi is ON. During boot, this will take a while to happen (till it executes the "shutdowncheck" script)
|
|
//so I dont want to cutoff power before it had a chance to fully boot up
|
|
if ((batteryLow || PowerState == ON) && BOOTOK())
|
|
{
|
|
if (batteryLow) {
|
|
#ifdef ENABLE_LCD
|
|
sprintf(lcdbuff, "Battery low! Shutting down Pi..");
|
|
#endif
|
|
batteryLowShutdown = true;
|
|
}
|
|
#ifdef ENABLE_LCD
|
|
else
|
|
sprintf(lcdbuff, "Shutting down Pi..");
|
|
refreshLCD();
|
|
#endif
|
|
|
|
// signal Pi to shutdown
|
|
digitalWrite(SIG_SHUTOFF, HIGH);
|
|
//DEBUGln("SIG_SHUTOFF - HIGH - if(batteryLow || (PowerState == 1 && BOOTOK())");
|
|
|
|
//now wait for the Pi to signal back
|
|
NOW = millis();
|
|
float in, out;
|
|
boolean forceShutdown = true;
|
|
|
|
POWER_LED_OFF();
|
|
while (millis()-NOW < RecycleTime)
|
|
{
|
|
if (in > 6.283) in = 0;
|
|
in += .00628;
|
|
|
|
out = sin(in) * 127.5 + 127.5;
|
|
analogWrite(BTN_LED_RED, out);
|
|
delayMicroseconds(1500);
|
|
|
|
//account for force-shutdown action (if button held for ForcedShutoffDelay, then force shutdown regardless)
|
|
if (millis()-NOW <= (ForcedShutoffDelay-SHUTDOWNHOLDTIME) && digitalRead(BUTTON) != 0)
|
|
forceShutdown = false;
|
|
if (millis()-NOW >= (ForcedShutoffDelay-SHUTDOWNHOLDTIME) && forceShutdown)
|
|
{
|
|
PowerState = OFF;
|
|
POWER_LED_OFF(); //digitalWrite(POWER_LED, PowerState); //turn off LED to indicate power is being cutoff
|
|
POWER(PowerState);
|
|
break;
|
|
}
|
|
|
|
if (millis() - NOW > ShutoffTriggerDelay)
|
|
{
|
|
// Pi signaling OK to turn off
|
|
if (!BOOTOK())
|
|
{
|
|
PowerState = OFF;
|
|
POWER_LED_OFF(); //digitalWrite(POWER_LED, PowerState); //turn off LED to indicate power is being cutoff
|
|
NOW = millis();
|
|
while (millis()-NOW < ShutdownFinalDelay)
|
|
{
|
|
if (in > 6.283) in = 0;
|
|
in += .00628;
|
|
out = sin(in) * 127.5 + 127.5;
|
|
analogWrite(BTN_LED_RED,out);
|
|
delayMicroseconds(300);
|
|
}
|
|
|
|
POWER(PowerState);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
// last chance: if power still on but button still pressed, force cutoff power
|
|
if (PowerState == ON && digitalRead(BUTTON) == 0)
|
|
{
|
|
PowerState = OFF;
|
|
POWER(PowerState);
|
|
}
|
|
|
|
#ifdef ENABLE_LCD
|
|
if (PowerState == OFF)
|
|
{
|
|
sprintf(lcdbuff, "Pi is now OFF");
|
|
refreshLCD();
|
|
}
|
|
#endif
|
|
|
|
digitalWrite(SIG_SHUTOFF, LOW);
|
|
//DEBUGln("SIG_SHUTOFF - LOW");
|
|
}
|
|
else if (PowerState == ON && !BOOTOK())
|
|
{
|
|
#ifdef ENABLE_LCD
|
|
sprintf(lcdbuff, "Forced shutdown..");
|
|
refreshLCD();
|
|
#endif
|
|
|
|
NOW = millis();
|
|
unsigned long NOW2 = millis();
|
|
int analogstep = 255 / ((ForcedShutoffDelay-SHUTDOWNHOLDTIME)/100); //every 500ms decrease LED intensity
|
|
while (digitalRead(BUTTON) == 0)
|
|
{
|
|
if (millis()-NOW2 > 100)
|
|
{
|
|
analogWrite(BTN_LED_RED, 255 - ((millis()-NOW)/100)*analogstep);
|
|
NOW2 = millis();
|
|
}
|
|
if (millis()-NOW > ForcedShutoffDelay-SHUTDOWNHOLDTIME)
|
|
{
|
|
//TODO: add blinking here to signal final shutdown delay
|
|
PowerState = OFF;
|
|
POWER(PowerState);
|
|
#ifdef ENABLE_LCD
|
|
sprintf(lcdbuff, "Pi is now OFF");
|
|
refreshLCD();
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
else if (PowerState == OFF)
|
|
{
|
|
PowerState = ON;
|
|
batteryLowShutdown=false;
|
|
POWER(PowerState);
|
|
}
|
|
}
|
|
|
|
if (PowerState == ON) POWER_LED_GRN() else POWER_LED_OFF(); //digitalWrite(POWER_LED, PowerState);
|
|
}
|
|
}
|
|
|
|
uint32_t buttonsLastChanged;
|
|
void handle2Buttons()
|
|
{
|
|
if (millis() - buttonsLastChanged < 200) return; //basic button debouncing & prevent changing level too fast
|
|
|
|
//button 1 - backlight
|
|
if (digitalRead(BUTTON1)==LOW)
|
|
{
|
|
buttonsLastChanged=millis();
|
|
Beep(3, false);
|
|
if (backlightLevel==BACKLIGHTLEVELS) backlightLevel=0;
|
|
else backlightLevel++;
|
|
LCD_BACKLIGHT(backlightLevel);
|
|
sprintf(lcdbuff, "LCDlight:%d/100", 100*backlightLevel/BACKLIGHTLEVELS);
|
|
refreshLCD();
|
|
}
|
|
|
|
//button 2 - message history
|
|
if (digitalRead(BUTTON2)==LOW)
|
|
{
|
|
buttonsLastChanged=millis();
|
|
Beep(3, false);
|
|
|
|
if (historyLength > 0) //if at least 1 data packet was received and saved to history...
|
|
{
|
|
sprintf(RSSIstr, "%ddBm", messageHistory[currMessageIndex].rssi); //paint the history rssi string for the LCDRefresh
|
|
rssi = messageHistory[currMessageIndex].rssi; //save the history rssi for the LCDRefresh signal icon
|
|
sprintf(lcdbuff, "<HISTORY[%d/%d]>\n%s", currMessageIndex+1, historyLength, messageHistory[currMessageIndex].data); //fill the LCD string buffer with the history data string
|
|
refreshLCD(); //paint the screen
|
|
if (currMessageIndex==0) currMessageIndex=historyLength-1; else currMessageIndex--; //this makes it cycle from the latest message towards oldest as you press BTN2
|
|
}
|
|
}
|
|
}
|
|
|
|
boolean BOOTOK() {
|
|
return analogRead(SIG_BOOTOK) > 800; //the BOOTOK signal is on an analog pin because a digital may not always pick it up (its less than 3.3v)
|
|
}
|
|
|
|
void POWER(uint8_t ON_OFF) {
|
|
digitalWrite(LATCH_VAL, ON_OFF);
|
|
digitalWrite(LATCH_EN, HIGH);
|
|
delay(5);
|
|
digitalWrite(LATCH_EN, LOW);
|
|
digitalWrite(PIN_LCD_CS, HIGH); //if shared with LATCH_VAL, should be HIGH when not used by latch
|
|
}
|
|
|
|
void Beep(byte theDelay, boolean twoSounds)
|
|
{
|
|
if (theDelay > 20) theDelay = 20;
|
|
tone(BUZZER, 4200); //4200
|
|
delay(theDelay);
|
|
noTone(BUZZER);
|
|
delay(10);
|
|
if (twoSounds)
|
|
{
|
|
tone(BUZZER, 4500); //4500
|
|
delay(theDelay);
|
|
noTone(BUZZER);
|
|
}
|
|
}
|
|
|
|
int checkFreeRAM()
|
|
{
|
|
extern int __heap_start, *__brkval;
|
|
int v;
|
|
return (int) &v - (__brkval == 0 ? (int) &__heap_start : (int) __brkval);
|
|
}
|
|
|
|
boolean readBattery() {
|
|
//periodically read the battery voltage
|
|
int currPeriod = millis()/BATTERYREADINTERVAL;
|
|
if (currPeriod != lastPeriod)
|
|
{
|
|
lastPeriod=currPeriod;
|
|
systemVoltage = BATTERY_VOLTS(analogRead(BATTERYSENSE));
|
|
//dtostrf(systemVoltage, 3,2, BATstr);
|
|
batteryLow = systemVoltage < LOWBATTERYTHRESHOLD;
|
|
return true; //signal that batt has been read
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void setup() {
|
|
Beep(20, false);delay(50);Beep(20, false);delay(50);Beep(20, false);
|
|
setupPowerControl();
|
|
Serial.begin(SERIAL_BAUD);
|
|
|
|
radio.initialize(FREQUENCY,NODEID,NETWORKID);
|
|
radio.encrypt(ENCRYPTKEY);
|
|
|
|
#ifdef IS_RFM69HW
|
|
radio.setHighPower(); //only for RFM69HW!
|
|
#endif
|
|
|
|
sprintf(lcdbuff, "Listening @ %dmhz...", FREQUENCY==RF69_433MHZ ? 433 : FREQUENCY==RF69_868MHZ ? 868 : 915);
|
|
DEBUGln(lcdbuff);
|
|
if (flash.initialize()) DEBUGln("SPI Flash Init OK!");
|
|
else DEBUGln(F("SPI Flash MEM FAIL!"));
|
|
|
|
#ifdef FREQUENCY_EXACT
|
|
radio.setFrequency(FREQUENCY_EXACT); //set frequency to some custom frequency
|
|
#endif
|
|
|
|
#ifdef ENABLE_ATC
|
|
DEBUGln(F("RFM69_ATC Enabled (Auto Transmission Control)"));
|
|
#endif
|
|
|
|
readBattery();
|
|
DEBUG(F("Free RAM bytes: "));DEBUG(checkFreeRAM());
|
|
|
|
#ifdef ENABLE_LCD
|
|
pinMode(PIN_LCD_LIGHT, OUTPUT); //LCD backlight, LOW = backlight ON
|
|
lcd.setRot180(); //rotate screen 180 degrees
|
|
lcd.setContrast(140); //120-160 seems to be usable range
|
|
drawLogo();
|
|
LCD_BACKLIGHT(backlightLevel);
|
|
delay(2000);
|
|
refreshLCD();
|
|
delay(1000);
|
|
#endif
|
|
}
|
|
|
|
boolean newPacketReceived;
|
|
void loop() {
|
|
handlePowerControl(); //checks any button presses and takes action
|
|
handle2Buttons(); //checks the general purpose buttons next to the LCD (R2+)
|
|
handleSerialInput(); //checks for any serial input from the Pi computer
|
|
|
|
//process any received radio packets
|
|
if (radio.receiveDone())
|
|
{
|
|
rssi = radio.RSSI;
|
|
if (radio.DATALEN > 0) //data packets have a payload
|
|
{
|
|
sprintf(lcdbuff, "[%d] %s", radio.SENDERID, radio.DATA);
|
|
sprintf(RSSIstr, "%ddBm", rssi);
|
|
Serial.print(lcdbuff); //this passes data to MightyHat / RaspberryPi
|
|
Serial.print(F(" [RSSI:"));Serial.print(rssi);Serial.print(']');
|
|
saveToHistory(lcdbuff, rssi);
|
|
}
|
|
|
|
//check if the packet is a wireless programming request
|
|
//removing this line will save 3kb+ of flash space
|
|
#ifdef ENABLE_WIRELESS_PROGRAMMING
|
|
CheckForWirelessHEX(radio, flash, false); //non verbose DEBUG
|
|
#endif
|
|
|
|
//respond to any ACK if requested
|
|
if (radio.ACKRequested())
|
|
{
|
|
radio.sendACK();
|
|
DEBUG(F("[ACK-sent]"));
|
|
}
|
|
|
|
//DEBUG(F("Free RAM bytes: "));DEBUG(checkFreeRAM());
|
|
|
|
Serial.println();
|
|
Blink(LED,2);
|
|
newPacketReceived = true;
|
|
}
|
|
|
|
readBattery();
|
|
|
|
#ifdef ENABLE_LCD
|
|
if (newPacketReceived || systemVoltagePrevious-systemVoltage > 0.01 || systemVoltagePrevious-systemVoltage < -0.1)
|
|
{
|
|
systemVoltagePrevious = systemVoltage;
|
|
newPacketReceived = false;
|
|
refreshLCD();
|
|
}
|
|
LCD_BACKLIGHT(batteryLow ? 0 : backlightLevel);
|
|
#endif
|
|
} |