// Sample RFM69 random temperature sender at fixed intervals (F) // Library and code by Felix Rusu - felix@lowpowerlab.com // Get the RFM69 library at: https://github.com/LowPowerLab/ #include //get it here: https://www.github.com/lowpowerlab/rfm69 #include #define NODEID 98 //unique for each node on same network #define NETWORKID 100 //the same on all nodes that talk to each other #define GATEWAYID 1 //Match frequency to the hardware version of the radio on your Moteino (uncomment one): #define FREQUENCY RF69_433MHZ #define FREQUENCY RF69_915MHZ #define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W! #define ENCRYPTKEY "sampleEncryptKey" //exactly the same 16 characters/bytes on all nodes! #define ACK_TIME 30 // max # of ms to wait for an ack #ifdef __AVR_ATmega1284P__ #define LED 15 // Moteino MEGAs have LEDs on D15 #define FLASH_SS 23 // and FLASH SS on D23 #else #define LED 9 // Moteinos have LEDs on D9 #define FLASH_SS 8 // and FLASH SS on D8 #endif #define SERIAL_BAUD 115200 int TRANSMITPERIOD = 10000; //transmit a packet to gateway so often (in ms) char buff[35]; byte sendSize=0; RFM69 radio; void setup() { Serial.begin(SERIAL_BAUD); radio.initialize(FREQUENCY,NODEID,NETWORKID); #ifdef IS_RFM69HW radio.setHighPower(); //uncomment only for RFM69HW! #endif radio.encrypt(ENCRYPTKEY); char buff[50]; sprintf(buff, "\nTransmitting at %d Mhz...", FREQUENCY==RF69_433MHZ ? 433 : FREQUENCY==RF69_868MHZ ? 868 : 915); Serial.println(buff); } long lastPeriod = 0; long randNumber1 = 0; long randNumber2 = 0; void loop() { if (radio.receiveDone()) { Serial.print('[');Serial.print(radio.SENDERID, DEC);Serial.print("] "); for (byte i = 0; i < radio.DATALEN; i++) Serial.print((char)radio.DATA[i]); Serial.print(" [RX_RSSI:");Serial.print(radio.RSSI);Serial.print("]"); if (radio.ACKRequested()) { radio.sendACK(); Serial.print(" - ACK sent"); } Blink(LED,3); Serial.println(); } int currPeriod = millis()/TRANSMITPERIOD; if (currPeriod != lastPeriod) { lastPeriod=currPeriod; randNumber1 = random(99); randNumber2 = random(99); if (randNumber2 > 70) sprintf(buff, "F:%d.5", randNumber1); else sprintf(buff, "F:-%d.5", randNumber1); sendSize = strlen(buff); if (radio.sendWithRetry(GATEWAYID, buff, sendSize)) Serial.print(" ok!"); else Serial.print(" nothing..."); Serial.println(); Blink(LED,3); } } void Blink(byte PIN, int DELAY_MS) { pinMode(PIN, OUTPUT); digitalWrite(PIN,HIGH); delay(DELAY_MS); digitalWrite(PIN,LOW); }