dc6b33d98b
License, add/update get/setFrequency(), & more
...
Update license to GPL 3.0
Add getFrequency()
Update setFrequency(freq in hz)
Add setNetwork(id)
Modify IRQ pinout for atmega32u4 (Arduino Leonardo)
2014-11-14 15:25:45 -05:00
b5ae481136
added ATmega32U4 support
2014-09-07 00:53:34 +02:00
e8a0767849
Support for MEGA, GPL3.0, nonintrusive SPI
2014-08-12 22:03:37 -04:00
06f00c18b9
Increase default ACK time
...
Too short ACK causing missed packets
2014-03-10 20:07:53 -04:00
cec7f05940
new BROADCAST_ADDR=255, avoid calling receiveBegin() in RX
2014-02-01 21:13:40 -05:00
a0f2aaf113
Add reception RSSI (more accurate)
2013-11-06 23:15:51 -05:00
61658a06be
Add readTemperature() and rcCalibration()
2013-09-05 19:32:11 -04:00
f21498fa91
Update RFM69.h
2013-08-16 21:37:54 -04:00
0c45be8b48
Make CSMA_LIMIT=-90dBm (less sensitive when sending)
...
Sometimes (especially 433Mhz versions) are too sensitive or there is more noise in the channel than usual. Touching the antenna or coiling it helps a lot but a more permanent fix is to adjust the sensitivity.
This addresses the issue when send sensitivity is too high and the radio will spend a lot of time reading RSSI to make sure channel is clear, resulting in dropped ACKs.
2013-08-02 10:27:14 -04:00
404a5add1d
Sketch updates, minor fixes
2013-07-30 16:50:37 -04:00
d23a4c95b9
bug fixes & performance improvements
2013-07-13 23:49:26 -04:00
61208552ba
Initial commit
2013-06-20 17:06:39 -04:00
LowPowerLab
Sebastian Wendel
LowPowerLab