78447f61ef
Custom SPI support
2020-06-02 13:43:09 +02:00
d3c706cc9a
listenModeSleep():AVR only, remove promiscuous()
2020-05-22 12:20:48 -04:00
64eb36ba85
add listenModeSleep() + example
2020-05-18 13:54:21 -04:00
1bc4b02f22
8mhz SPI clock
2020-05-18 11:12:28 -04:00
9bd3608a2a
promiscuous deprecated (pragma message)
2020-04-16 09:57:48 -04:00
1fe8191663
SAMD21 faster SPI clk, SAMD51 IRQ_PIN
2020-03-31 11:53:58 -04:00
1e1236d4b4
ESP32 SPI/pinout support
2020-03-31 11:51:11 -04:00
aec150f747
1.4.0 changeset
2020-03-03 22:57:06 -05:00
6728abaca0
Use relative includes
2020-02-14 14:02:28 +03:00
d8f8892377
SPI settings fix for ESP
2020-01-21 12:57:21 -05:00
e6adf4e6d5
ACKRequested() more explicit
2020-01-21 12:56:23 -05:00
fbc65dedcf
Replace promiscuous() with spyMode()
2020-01-21 12:52:45 -05:00
4a6f77ad47
A few optimizations
2019-08-02 16:38:00 -04:00
6ddfb2ff7d
Add ISR_PREFIX for ESP
...
See Issue #124
2019-07-25 10:41:14 -04:00
3913d5689c
null terminate radio.DATA
2019-06-05 11:38:14 -04:00
3ace1ac2a4
10bit addressing
...
Uses 4 least significant bits in the CTL header byte to upgrade from 8bit to 10bit addressing, thus extending from 256 to 1024 possible addresses.
2019-05-01 12:02:03 -04:00
f072131779
Address issue #120
2019-05-01 11:35:34 -04:00
32a80592e2
Remove volatiles per issue #115
2019-01-15 19:29:39 -05:00
6b9d0c91b9
Add SPI_Transactions
2018-12-13 19:39:20 -05:00
3d4a8c99c4
Handle interrupt outside actual ISR
...
### Commit adapted from 2793a5a909
2018-08-08 15:34:31 -04:00
65fe6dda5f
fix hardcoded F_STEP
...
Thanks to Markus Kettner for spotting this.
2018-04-15 14:57:45 -04:00
f1cbbea15a
Update copyrights
2018-04-09 14:19:14 -04:00
e1145c9543
Merge ListenMode branch code
2018-04-05 16:20:12 -04:00
dfffbba7b8
update interrupt, move ctor
2018-04-05 16:00:36 -04:00
e1faeefdb7
Revert "Allow choosing the SPI interface"
2018-04-05 15:15:36 -04:00
dd5dc9a706
Allow caller specify a specific SPIClass in the constructor
2018-03-27 22:10:44 -06:00
dcda86fb90
STM32 M3 support
2018-01-25 19:35:46 -05:00
928de01a2b
add readAllRegsCompact()
2017-07-24 13:41:41 -04:00
18494fe085
merge new RFM69_OTA; upgrade wireless programming
2016-11-17 21:13:22 -05:00
c4dd545556
Revert "Declare RFM69 interrupt with SPI.usingInterrupt()"
2016-07-13 08:51:55 -04:00
bc0665b018
Declare RFM69 interrupt with SPI.usingInterrupt()
...
This interrupt is then masked during SPI transactions of other
code/libraries that use SPI transactions, to prevent the RFM69
interrupt handler (which does SPI transfers) preempting other SPI
transfers.
2016-06-19 10:18:39 +02:00
2133bbfe79
Don't reenable interrupts in the ISR
...
The unselect() method, liberally called directly and indirectly
from the interrupt handler, always reenables interrupts after it's
done. In ISRs, interrupts are disabled by default, and although
reenabling is allowed, the interrupt handler doesn't seem to have
reentrant code. Therefore, only reenable when not in an ISR.
This was causing problems in certain circumstances, e.g. with
an Arduino Ethernet shield, most packet receptions would cause
resets.
2016-06-04 20:22:45 +02:00
ec90680e00
Revert "add SPI transaction support"
...
This reverts commit c38928ecb4
2016-02-29 21:21:52 -05:00
c38928ecb4
add SPI transaction support
...
Based on this commit:
e707b9a3adhttps://github.com/TomWS1/RFM69/tree/With-SPI-and-transmit-power-updates
2016-02-29 17:37:42 -05:00
c24051e933
minor tweaks & SPCR/SPSR filters
2016-02-29 14:36:24 -05:00
0c8fbacc5c
+TomWS1's virtualization & more; +deadlock checks
...
Integrate TomWS1's virtualized changes, and virtual interruptHook().
Set ACK_REQUESTED = 0 in sendACK() to avoid ACK infinite looping.
Protect while(true) calls against infinite looping.
2015-10-01 12:15:28 -04:00
9de0c3ba9d
Update RFM69.cpp
2015-08-22 22:13:20 -04:00
c3c9c7df1b
Merge remote-tracking branch 'upstream/master'
...
- Manually resolved RFM69.cpp
Conflicts:
RFM69.cpp
2015-08-22 20:03:51 -05:00
4b82e285b0
add more comments
2015-05-19 15:08:41 -04:00
5502c186db
Fix setPowerLevel
2015-04-01 16:26:54 -04:00
c9440c9249
Save program space by calculating CTLbyte instead of fixed literal
...
by fca63f659d
2015-02-06 12:21:13 +01:00
d665e5cf80
Disable 1MHz ClkOut on DIO5 to save power
2015-01-24 15:10:52 +01:00
a0948ed849
Update RFM69registers.h
2015-01-24 14:20:28 +01:00
3899f1f018
Ensure _slaveSelectPin is driven high after initialize() or setCS()
2015-01-18 12:31:16 +01:00
8cecd36d9b
Follow Optimized Frequency Hopping Sequence
...
by cf13c60ae5
2015-01-18 12:22:43 +01:00
c491a2ab82
Ensure FIFO & associated flags are reset during initialize()
...
by aa3ebc2997
2015-01-18 12:09:08 +01:00
c34a63c2e7
Fixed Warning Wnarrowing
2015-01-12 15:09:49 +01:00
5832c173fe
Changed byte etc. to standard types for compatibility
...
binary compatible - only source changed
2015-01-12 11:34:16 +01:00
4767945f7f
Unify hexadecimal notation and whitespace
2015-01-12 11:00:43 +01:00
bfa5dd8afd
Unify comment style and whitespace
...
Use 'git diff --ignore-space-change --word-diff=plain' to verify.
2015-01-06 15:25:29 +01:00
Auri
Felix Rusu
Maxim Prokhorov
Adam Demuri
Mark Bergsma
Ryan Pipkin
Daniel A. Maierhofer