Cansat
/
RFM69_LowPowerLab
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Bug fixes and improvements

This commit is contained in:
LowPowerLab 2016-01-08 15:24:07 -05:00
parent a2b2503610
commit f8c65fe7b6
1 changed files with 15 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Examples/MightyHat/MightyHat.ino
View File

@ -44,6 +44,7 @@
#define NODEID 1 //the gateway has ID=1
#define NETWORKID 100 //all nodes on the same network can talk to each other
#define FREQUENCY RF69_915MHZ //Match this with the version of your Moteino! (others: RF69_433MHZ, RF69_868MHZ)
#define FREQUENCY_EXACT 917000000 //uncomment and set to a specific frequency in Hz, if commented the center frequency is used
#define ENCRYPTKEY "sampleEncryptKey" //has to be same 16 characters/bytes on all nodes, not more not less!
#define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W!
#define ENABLE_ATC //comment out this line to disable AUTO TRANSMISSION CONTROL //more here: http://lowpowerlab.com/blog/2015/11/11/rfm69_atc-automatic-transmission-control/
@ -122,6 +123,7 @@ byte PowerState = OFF;
long lastPeriod = -1;
int rssi=0;
float systemVoltage = 5;
float systemVoltagePrevious = 5;
boolean batteryLow=false;
boolean batteryLowShutdown=false;
@ -250,16 +252,11 @@ void refreshLCD() {
else bmpPtr = (byte*)xbmp_batt_x;
lcd.drawXBMP(lcdwidth-xbmp_batt_width, lcdheight-xbmp_batt_height, xbmp_batt_width, xbmp_batt_height, bmpPtr);
lcd.setPrintPos(54, 48);
if (systemVoltage >= CHARGINGTHRESHOLD)
{
sprintf(BATvstr, "CHRG");
lcd.drawStr(54, 48, BATvstr);
}
else {
lcd.setPrintPos(54, 48) ;
lcd.print("CHRG");
else
lcd.print(systemVoltage); //sprintf(BATvstr, "%sv", BATstr);
}
//lcd.drawStr(50, 48, BATvstr);
//print rssi and icon
if (rssi > -70) bmpPtr = (byte*)xbmp_rssi_3;
@ -323,7 +320,7 @@ void setupPowerControl(){
pinMode(BTN_LED_RED, OUTPUT);
pinMode(BTN_LED_GRN, OUTPUT);
pinMode(LATCH_EN, OUTPUT);
//digitalWrite(LATCH_EN, LOW);
digitalWrite(LATCH_EN, LOW);
pinMode(LATCH_VAL, OUTPUT);
pinMode(BATTERYSENSE, INPUT);
digitalWrite(SIG_SHUTOFF, LOW);//added after sudden shutdown quirks, DO NOT REMOVE!
@ -535,9 +532,9 @@ boolean BOOTOK() {
}
void POWER(uint8_t ON_OFF) {
digitalWrite(LATCH_VAL, ON_OFF);
digitalWrite(LATCH_EN, HIGH);
delay(5);
digitalWrite(LATCH_VAL, ON_OFF);
digitalWrite(LATCH_EN, LOW);
}
@ -578,6 +575,7 @@ boolean readBattery() {
}
void setup() {
Beep(20, false);delay(50);Beep(20, false);delay(50);Beep(20, false);
setupPowerControl();
Serial.begin(SERIAL_BAUD);
@ -591,7 +589,11 @@ void setup() {
sprintf(lcdbuff, "Listening @ %dmhz...", FREQUENCY==RF69_433MHZ ? 433 : FREQUENCY==RF69_868MHZ ? 868 : 915);
DEBUGln(lcdbuff);
if (flash.initialize()) DEBUGln("SPI Flash Init OK!");
else DEBUGln(F("SPI Flash MEM not found, skipping..."));
else DEBUGln(F("SPI Flash MEM FAIL!"));
#ifdef FREQUENCY_EXACT
radio.setFrequency(FREQUENCY_EXACT); //set frequency to some custom frequency
#endif
#ifdef ENABLE_ATC
DEBUGln(F("RFM69_ATC Enabled (Auto Transmission Control)"));
@ -638,7 +640,6 @@ void loop() {
//respond to any ACK if requested
if (radio.ACKRequested())
{
byte theNodeID = radio.SENDERID;
radio.sendACK();
DEBUG(F("[ACK-sent]"));
}
@ -653,8 +654,9 @@ void loop() {
readBattery();
#ifdef ENABLE_LCD
if (newPacketReceived)
if (newPacketReceived || systemVoltagePrevious-systemVoltage > 0.01 || systemVoltagePrevious-systemVoltage < -0.1)
{
systemVoltagePrevious = systemVoltage;
newPacketReceived = false;
refreshLCD();
}