diff --git a/Examples/GarageMote/GarageMote.ino b/Examples/GarageMote/GarageMote.ino index bbe57d0..8ed1b97 100644 --- a/Examples/GarageMote/GarageMote.ino +++ b/Examples/GarageMote/GarageMote.ino @@ -1,7 +1,7 @@ // ********************************************************************************************************** // GarageMote garage door controller sketch that works with Moteinos equipped with HopeRF RFM69W/RFM69HW // Can be adapted to use Moteinos using RFM12B -// 2014-07-14 (C) felix@lowpowerlab.com, http://www.LowPowerLab.com +// 2013-09-13 (C) felix@lowpowerlab.com, http://www.LowPowerLab.com // ********************************************************************************************************** // It uses 2 hall effect sensors (and magnets mounted on the garage belt/chain) to detect the position of the // door, and a small signal relay to be able to toggle the garage opener. @@ -14,25 +14,24 @@ // ********************************************************************************************************** // Creative Commons Attrib Share-Alike License // You are free to use/extend this code/library but please abide with the CCSA license: -// http://creativecommons.org/licenses/by-sa/4.0/ -// ********************************************************************************** +// http://creativecommons.org/licenses/by-sa/3.0/ +// ********************************************************************************************************** -#include //get it here: http://github.com/lowpowerlab/rfm69 -#include //get it here: http://github.com/lowpowerlab/spiflash -#include //get it here: https://github.com/LowPowerLab/WirelessProgramming -#include //comes with Arduino IDE (www.arduino.cc) +#include //install this library in your Arduino library directory from https://github.com/LowPowerLab/RFM69 +#include //***************************************************************************************************************************** // ADJUST THE SETTINGS BELOW DEPENDING ON YOUR HARDWARE/SITUATION! //***************************************************************************************************************************** -#define GATEWAYID 1 -#define NODEID 122 -#define NETWORKID 100 -//#define FREQUENCY RF69_433MHZ -//#define FREQUENCY RF69_868MHZ -#define FREQUENCY RF69_915MHZ //Match this with the version of your Moteino! (others: RF69_433MHZ, RF69_868MHZ) -#define ENCRYPTKEY "sampleEncryptKey" //has to be same 16 characters/bytes on all nodes, not more not less! -#define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W! +#define GATEWAYID 1 +#define NODEID 99 +#define NETWORKID 100 +//Match frequency to the hardware version of the radio on your Moteino (uncomment one): +//#define FREQUENCY RF69_433MHZ +//#define FREQUENCY RF69_868MHZ +#define FREQUENCY RF69_915MHZ +#define ENCRYPTKEY "sampleEncryptKey" //has to be same 16 characters/bytes on all nodes, not more not less! +//#define IS_RFM69HW //uncomment only for RFM69HW! Leave out if you have RFM69W! #define HALLSENSOR1 A0 #define HALLSENSOR1_EN 4 @@ -73,18 +72,12 @@ void setStatus(byte newSTATUS, boolean reportStatus=true); byte STATUS; -unsigned long lastStatusTimestamp=0; -unsigned long ledPulseTimestamp=0; -byte lastRequesterNodeID=GATEWAYID; +long lastStatusTimestamp=0; +byte lastRequesterNodeID=0; +long ledPulseTimestamp=0; int ledPulseValue=0; boolean ledPulseDirection=false; //false=down, true=up RFM69 radio; -///////////////////////////////////////////////////////////////////////////// -// flash(SPI_CS, MANUFACTURER_ID) -// SPI_CS - CS pin attached to SPI flash chip (8 in case of Moteino) -// MANUFACTURER_ID - OPTIONAL, 0xEF30 for windbond 4mbit flash (Moteino OEM) -///////////////////////////////////////////////////////////////////////////// -SPIFlash flash(8, 0xEF30); void setup(void) { @@ -99,13 +92,13 @@ void setup(void) radio.initialize(FREQUENCY,NODEID,NETWORKID); #ifdef IS_RFM69HW - radio.setHighPower(); //uncomment only for RFM69HW! + radio.setHighPower(); //must include only for RFM69HW! #endif radio.encrypt(ENCRYPTKEY); char buff[50]; sprintf(buff, "GarageMote : %d Mhz...", FREQUENCY==RF69_433MHZ ? 433 : FREQUENCY==RF69_868MHZ ? 868 : 915); - DEBUGln(buff); + Serial.println(buff); if (hallSensorRead(HALLSENSOR_OPENSIDE)==true) setStatus(STATUS_OPEN); @@ -114,7 +107,7 @@ void setup(void) else setStatus(STATUS_UNKNOWN); } -unsigned long doorPulseCount = 0; +long doorPulseCount = 0; char input; void loop() @@ -124,13 +117,13 @@ void loop() if (input=='r') { - DEBUGln("Relay test..."); + Serial.println("Relay test..."); pulseRelay(); input = 0; } // UNKNOWN => OPEN/CLOSED - if (STATUS == STATUS_UNKNOWN && millis()-(lastStatusTimestamp)>STATUS_CHANGE_MIN) + if (STATUS == STATUS_UNKNOWN && millis()-lastStatusTimestamp>STATUS_CHANGE_MIN) { if (hallSensorRead(HALLSENSOR_OPENSIDE)==true) setStatus(STATUS_OPEN); @@ -138,15 +131,15 @@ void loop() setStatus(STATUS_CLOSED); } - // OPEN => CLOSING - if (STATUS == STATUS_OPEN && millis()-(lastStatusTimestamp)>STATUS_CHANGE_MIN) + // OPEN => CLOSING + if (STATUS == STATUS_OPEN && millis()-lastStatusTimestamp>STATUS_CHANGE_MIN) { if (hallSensorRead(HALLSENSOR_OPENSIDE)==false) setStatus(STATUS_CLOSING); } // CLOSED => OPENING - if (STATUS == STATUS_CLOSED && millis()-(lastStatusTimestamp)>STATUS_CHANGE_MIN) + if (STATUS == STATUS_CLOSED && millis()-lastStatusTimestamp>STATUS_CHANGE_MIN) { if (hallSensorRead(HALLSENSOR_CLOSEDSIDE)==false) setStatus(STATUS_OPENING); @@ -155,13 +148,13 @@ void loop() // OPENING/CLOSING => OPEN (when door returns to open due to obstacle or toggle action) // => CLOSED (when door closes normally from OPEN) // => UNKNOWN (when more time passes than normally would for a door up/down movement) - if ((STATUS == STATUS_OPENING || STATUS == STATUS_CLOSING) && millis()-(lastStatusTimestamp)>STATUS_CHANGE_MIN) + if ((STATUS == STATUS_OPENING || STATUS == STATUS_CLOSING) && millis()-lastStatusTimestamp>STATUS_CHANGE_MIN) { if (hallSensorRead(HALLSENSOR_OPENSIDE)==true) setStatus(STATUS_OPEN); else if (hallSensorRead(HALLSENSOR_CLOSEDSIDE)==true) setStatus(STATUS_CLOSED); - else if (millis()-(lastStatusTimestamp)>DOOR_MOVEMENT_TIME) + else if (millis()-lastStatusTimestamp>DOOR_MOVEMENT_TIME) setStatus(STATUS_UNKNOWN); } @@ -170,37 +163,30 @@ void loop() byte newStatus=STATUS; boolean reportStatusRequest=false; lastRequesterNodeID = radio.SENDERID; - DEBUG('[');DEBUG(radio.SENDERID);DEBUG("] "); + DEBUG('[');Serial.print(radio.SENDERID, DEC);Serial.print("] "); for (byte i = 0; i < radio.DATALEN; i++) DEBUG((char)radio.DATA[i]); - if (radio.DATALEN==3) + //check for an OPEN/CLOSE/STATUS request + if (radio.DATA[0]=='O' && radio.DATA[1]=='P' && radio.DATA[2]=='N') { - //check for an OPEN/CLOSE/STATUS request - if (radio.DATA[0]=='O' && radio.DATA[1]=='P' && radio.DATA[2]=='N') - { - if (millis()-(lastStatusTimestamp) > STATUS_CHANGE_MIN && (STATUS == STATUS_CLOSED || STATUS == STATUS_CLOSING || STATUS == STATUS_UNKNOWN)) - newStatus = STATUS_OPENING; - //else radio.Send(requester, "INVALID", 7); - } - if (radio.DATA[0]=='C' && radio.DATA[1]=='L' && radio.DATA[2]=='S') - { - if (millis()-(lastStatusTimestamp) > STATUS_CHANGE_MIN && (STATUS == STATUS_OPEN || STATUS == STATUS_OPENING || STATUS == STATUS_UNKNOWN)) - newStatus = STATUS_CLOSING; - //else radio.Send(requester, "INVALID", 7); - } - if (radio.DATA[0]=='S' && radio.DATA[1]=='T' && radio.DATA[2]=='S') - { - reportStatusRequest = true; - } + if (millis()-lastStatusTimestamp > STATUS_CHANGE_MIN && (STATUS == STATUS_CLOSED || STATUS == STATUS_CLOSING || STATUS == STATUS_UNKNOWN)) + newStatus = STATUS_OPENING; + //else radio.Send(requester, "INVALID", 7); + } + if (radio.DATA[0]=='C' && radio.DATA[1]=='L' && radio.DATA[2]=='S') + { + if (millis()-lastStatusTimestamp > STATUS_CHANGE_MIN && (STATUS == STATUS_OPEN || STATUS == STATUS_OPENING || STATUS == STATUS_UNKNOWN)) + newStatus = STATUS_CLOSING; + //else radio.Send(requester, "INVALID", 7); + } + if (radio.DATA[0]=='S' && radio.DATA[1]=='T' && radio.DATA[2]=='S') + { + reportStatusRequest = true; } - - // wireless programming token check - // DO NOT REMOVE, or GarageMote will not be wirelessly programmable any more! - CheckForWirelessHEX(radio, flash, true); //first send any ACK to request - DEBUG(" [RX_RSSI:");DEBUG(radio.RSSI);DEBUG("]"); + DEBUG(" [RX_RSSI:");DEBUG(radio.readRSSI());DEBUG("]"); if (radio.ACKRequested()) { radio.sendACK(); @@ -228,7 +214,7 @@ void loop() } if (STATUS == STATUS_OPENING || STATUS == STATUS_CLOSING) //pulse { - if (millis()-(ledPulseTimestamp) > LED_PULSE_PERIOD/256) + if (millis()-ledPulseTimestamp > LED_PULSE_PERIOD/256) { ledPulseValue = ledPulseDirection ? ledPulseValue + LED_PULSE_PERIOD/256 : ledPulseValue - LED_PULSE_PERIOD/256; @@ -249,7 +235,7 @@ void loop() } if (STATUS == STATUS_UNKNOWN) //blink { - if (millis()-(ledPulseTimestamp) > LED_PULSE_PERIOD/20) + if (millis()-ledPulseTimestamp > LED_PULSE_PERIOD/20) { ledPulseDirection = !ledPulseDirection; digitalWrite(LED, ledPulseDirection ? HIGH : LOW); @@ -302,4 +288,4 @@ void Blink(byte PIN, byte DELAY_MS) digitalWrite(PIN,HIGH); delay(DELAY_MS); digitalWrite(PIN,LOW); -} \ No newline at end of file +}