diff --git a/Examples/DeepSleep_usingLowPowerLibrary/DeepSleep_usingLowPowerLibrary.ino b/Examples/DeepSleep_usingLowPowerLibrary/DeepSleep_usingLowPowerLibrary.ino
new file mode 100644
index 0000000..826dbf3
--- /dev/null
+++ b/Examples/DeepSleep_usingLowPowerLibrary/DeepSleep_usingLowPowerLibrary.ino
@@ -0,0 +1,65 @@
+//***********************************************************************************************************
+// Sample sketch that achieves the lowest power on a Moteino of ~6.5uA
+// Everything is put to sleep including the MCU, the radio (if any) and the FlashMem chip
+//**** SETTINGS *********************************************************************************************
+#define WITH_RFM69              //comment this line out if you don't have a RFM69 on your Moteino
+#define WITH_SPIFLASH           //comment this line out if you don't have the FLASH-MEM chip on your Moteino
+//***********************************************************************************************************
+
+#include <LowPower.h> //get library from: https://github.com/lowpowerlab/lowpower
+                      //writeup here: http://www.rocketscream.com/blog/2011/07/04/lightweight-low-power-arduino-library/
+
+#ifdef __AVR_ATmega1284P__
+  #define LED           15 // Moteino MEGAs have LEDs on D15
+  #define FLASH_SS      23 // and FLASH SS on D23
+#else
+  #define LED           9 // Moteinos have LEDs on D9
+  #define FLASH_SS      8 // and FLASH SS on D8
+#endif
+
+#if defined(WITH_RFM69) || defined(WITH_SPIFLASH)
+  #include <SPI.h>                //comes with Arduino IDE (www.arduino.cc)
+  #if defined(WITH_RFM69)
+    #include <RFM69.h>            //get it here: https://www.github.com/lowpowerlab/rfm69
+    RFM69 radio;
+  #endif
+  #if defined(WITH_SPIFLASH)
+    #include <SPIFlash.h>         //get it here: https://www.github.com/lowpowerlab/spiflash
+    SPIFlash flash(FLASH_SS, 0xEF30); //EF30 for 4mbit  Windbond chip (W25X40CL)
+  #endif
+#endif
+
+void setup () {
+#ifdef WITH_RFM69
+  radio.sleep();
+#endif
+
+#ifdef WITH_SPIFLASH
+  if (flash.initialize())
+    flash.sleep();
+#endif
+
+  for (uint8_t i=0; i<=A5; i++)
+  {
+#ifdef WITH_RFM69
+    if (i == RF69_SPI_CS) continue;
+#endif
+#ifdef WITH_SPIFLASH
+    if (i == FLASH_SS) continue;
+#endif
+    pinMode(i, OUTPUT);
+    digitalWrite(i, LOW);
+  }
+}
+
+void loop () 
+{
+  //optional blink to know radio/flash sleeping went OK
+  pinMode(LED, OUTPUT);
+  digitalWrite(LED, HIGH);
+  delay(30);
+  digitalWrite(LED, LOW);
+
+  //sleep MCU for 8seconds
+  LowPower.powerDown(SLEEP_8S, ADC_OFF, BOD_OFF);
+}