diff --git a/Examples/DoorBellMote/DoorBellMote.ino b/Examples/DoorBellMote/DoorBellMote.ino
new file mode 100644
index 0000000..fdbf076
--- /dev/null
+++ b/Examples/DoorBellMote/DoorBellMote.ino
@@ -0,0 +1,185 @@
+// **********************************************************************************
+// DoorBellMote sketch works with Moteinos equipped with RFM69W/RFM69HW
+// Can be adapted to use Moteinos/Arduinos using RFM12B or other RFM69 variants (RFM69CW, RFM69HCW)
+// http://www.LowPowerLab.com/
+// 2015-04-13 (C) Felix Rusu of http://www.LowPowerLab.com/
+// **********************************************************************************
+// It detects current flow at the doorbell transformer and send a message each time to the gateway
+// It can trigger doorbell through a relay powered from pins D6+D7
+// Deploy and forget: wirelessly programmable via Moteino + WirelessHEX69 library
+// **********************************************************************************
+// License
+// **********************************************************************************
+// This program is free software; you can redistribute it 
+// and/or modify it under the terms of the GNU General    
+// Public License as published by the Free Software       
+// Foundation; either version 3 of the License, or        
+// (at your option) any later version.                    
+//                                                        
+// This program is distributed in the hope that it will   
+// be useful, but WITHOUT ANY WARRANTY; without even the  
+// implied warranty of MERCHANTABILITY or FITNESS FOR A   
+// PARTICULAR PURPOSE. See the GNU General Public        
+// License for more details.                              
+//                                                        
+// You should have received a copy of the GNU General    
+// Public License along with this program.
+// If not, see <http://www.gnu.org/licenses/>.
+//                                                        
+// Licence can be viewed at                               
+// http://www.gnu.org/licenses/gpl-3.0.txt
+//
+// Please maintain this license information along with authorship
+// and copyright notices in any redistribution of this code
+// **********************************************************************************
+#include <RFM69.h>         //get it here: http://github.com/lowpowerlab/rfm69
+#include <SPIFlash.h>      //get it here: http://github.com/lowpowerlab/spiflash
+#include <WirelessHEX69.h> //get it here: https://github.com/LowPowerLab/WirelessProgramming
+#include <SPI.h>           //comes with Arduino IDE (www.arduino.cc)
+
+//*****************************************************************************************************************************
+// ADJUST THE SETTINGS BELOW DEPENDING ON YOUR HARDWARE/SITUATION!
+//*****************************************************************************************************************************
+#define GATEWAYID   1
+#define NODEID      133
+#define NETWORKID   100
+//#define FREQUENCY     RF69_433MHZ
+//#define FREQUENCY     RF69_868MHZ
+#define FREQUENCY       RF69_915MHZ //Match this with the version of your Moteino! (others: RF69_433MHZ, RF69_868MHZ)
+#define ENCRYPTKEY      "sampleEncryptKey" //has to be same 16 characters/bytes on all nodes, not more not less!
+#define IS_RFM69HW    //uncomment only for RFM69HW! Leave out if you have RFM69W!
+
+#define CHIMEPIN              4 // active HIGH chime signal from detector H11AA1 circuit
+#define RELAYPIN1             6
+#define RELAYPIN2             7
+#define RELAY_PULSE_MS      250  //just enough that the doorbell chimne will trigger
+#define RINGDELAY          3000
+//*****************************************************************************************************************************
+#define LED                  9   //pin connected to onboard LED
+#define SERIAL_BAUD     115200
+#define SERIAL_EN                //comment out if you don't want any serial output
+
+#ifdef SERIAL_EN
+  #define DEBUG(input)   {Serial.print(input); delay(1);}
+  #define DEBUGln(input) {Serial.println(input); delay(1);}
+#else
+  #define DEBUG(input);
+  #define DEBUGln(input);
+#endif
+
+RFM69 radio;
+/////////////////////////////////////////////////////////////////////////////
+// flash(SPI_CS, MANUFACTURER_ID)
+// SPI_CS          - CS pin attached to SPI flash chip (8 in case of Moteino)
+// MANUFACTURER_ID - OPTIONAL, 0xEF30 for windbond 4mbit flash (Moteino OEM)
+/////////////////////////////////////////////////////////////////////////////
+SPIFlash flash(8, 0xEF30); //regular Moteinos have FLASH MEM on D8, MEGA has it on D15
+
+void setup(void)
+{
+  Serial.begin(SERIAL_BAUD);
+  pinMode(CHIMEPIN, INPUT);
+  pinMode(RELAYPIN1, OUTPUT);
+  pinMode(RELAYPIN2, OUTPUT);
+  pinMode(LED, OUTPUT);
+  
+  radio.initialize(FREQUENCY,NODEID,NETWORKID);
+#ifdef IS_RFM69HW
+  radio.setHighPower(); //uncomment only for RFM69HW!
+#endif
+  radio.encrypt(ENCRYPTKEY);
+
+  char buff[50];
+  sprintf(buff, "DoorBellMote : %d Mhz...", FREQUENCY==RF69_433MHZ ? 433 : FREQUENCY==RF69_868MHZ ? 868 : 915);
+  DEBUGln(buff);
+}
+
+uint32_t doorPulseCount = 0;
+uint32_t lastStatusTimestamp=0;
+uint32_t LEDCYCLETIMER=0;
+byte LEDSTATE=LOW;
+char input;
+byte ring=false;
+
+void loop()
+{
+  if (Serial.available())
+    input = Serial.read();
+    
+  if (input=='r')
+  {
+    DEBUGln("Relay test...");
+    pulseRelay();
+    input = 0;
+  }
+ 
+  if (millis()-(lastStatusTimestamp)>RINGDELAY)
+  {
+    delay(50); //some basic debouncing
+    if (digitalRead(CHIMEPIN) == HIGH)
+    {
+      lastStatusTimestamp = millis();
+      radio.sendWithRetry(GATEWAYID, "RING", 4);
+      Blink(LED,20);
+      Blink(LED,20);
+      Blink(LED,20);
+    }
+  }
+
+  if (radio.receiveDone())
+  {
+    DEBUG('[');DEBUG(radio.SENDERID);DEBUG("] ");
+    for (byte i = 0; i < radio.DATALEN; i++)
+      DEBUG((char)radio.DATA[i]);
+
+    //
+    if (radio.DATALEN==4)
+      if (radio.DATA[0]=='R' && radio.DATA[1]=='I' && radio.DATA[2]=='N' && radio.DATA[3]=='G')
+        ring = true;
+    
+    // wireless programming token check
+    // DO NOT REMOVE, or GarageMote will not be wirelessly programmable any more!
+    CheckForWirelessHEX(radio, flash, true);
+
+    //first send any ACK to request
+    DEBUG("   [RX_RSSI:");DEBUG(radio.RSSI);DEBUG("]");
+    if (radio.ACKRequested())
+    {
+      radio.sendACK();
+      DEBUG(" - ACK sent.");
+    }
+
+    if (ring)
+    {
+      pulseRelay();
+      ring = false;
+    }
+
+    DEBUGln();
+  }
+  
+  if (millis() - LEDCYCLETIMER > 3000)
+  {
+    LEDCYCLETIMER = millis();
+    LEDSTATE = !LEDSTATE;
+    digitalWrite(LED, LEDSTATE);
+  }
+}
+
+void pulseRelay()
+{
+  digitalWrite(RELAYPIN1, HIGH);
+  digitalWrite(RELAYPIN2, HIGH);
+  delay(RELAY_PULSE_MS);
+  digitalWrite(RELAYPIN1, LOW);
+  digitalWrite(RELAYPIN2, LOW);
+}
+
+void Blink(byte PIN, byte DELAY_MS)
+{
+  pinMode(PIN, OUTPUT);
+  digitalWrite(PIN,HIGH);
+  delay(DELAY_MS/2);
+  digitalWrite(PIN,LOW);
+  delay(DELAY_MS/2);  
+}