Add new getter functions to RFM69 and RFM69 ATC

- getVersion() to read RFM version
- getAddress() to return configured node ID
- getNetwork() to return configured network ID
- getFrequencyDeviation() to read frequency deviation
- getBitRate() to read the modulation bitrate in bits/second
- getSpyMode() to return spy mode setting
- isSyncOn()
- getSyncSize()
- isCrcOn() to check if CRC is activated
- isAesOn() to check if encryption is enabled
- isHighPower() to check if module is configured as HCW or not
- dBm_to_mW() to convert dBm to mW
- getOutputPower() to get the configured output power instead of returning the last set value
- getTargetRssi() to get the configured RSSI value, only for RFM69_ATC
- `_networkID` made public to get it via getNetwork() function

RFM69.cpp

@@ -140,14 +140,18 @@ bool RFM69::initialize(uint8_t freqBand, uint16_t nodeID, uint8_t networkID) {
   attachInterrupt(_interruptNum, RFM69::isr0, RISING);
 
   _address = nodeID;
+  _networkID = networkID;
 #if defined(RF69_LISTENMODE_ENABLE)
   selfPointer = this;
   _freqBand = freqBand;
-  _networkID = networkID;
 #endif
   return true;
 }
 
+uint8_t RFM69::getVersion() {
+  return readReg(REG_VERSION);
+}
+
 // return the frequency (in Hz)
 uint32_t RFM69::getFrequency() {
   return RF69_FSTEP * (((uint32_t) readReg(REG_FRFMSB) << 16) + ((uint16_t) readReg(REG_FRFMID) << 8) + readReg(REG_FRFLSB));
@@ -169,6 +173,15 @@ void RFM69::setFrequency(uint32_t freqHz) {
   setMode(oldMode);
 }
 
+// return the frequency deviation (in Hz)
+uint32_t RFM69::getFrequencyDeviation() {
+return RF69_FSTEP * ((readReg(REG_FDEVMSB) << 8) | readReg(REG_FDEVLSB));
+}
+
+uint32_t RFM69::getBitRate() {
+  return RF69_FXOSC / ((readReg(REG_BITRATEMSB) << 8) | readReg(REG_BITRATELSB));
+}
+
 void RFM69::setMode(uint8_t newMode) {
   if (newMode == _mode)
     return;
@@ -213,11 +226,20 @@ void RFM69::setAddress(uint16_t addr) {
   writeReg(REG_NODEADRS, _address); // unused in packet mode
 }
 
+uint16_t RFM69::getAddress() {
+  return _address;
+}
+
 // set this node's network id
 void RFM69::setNetwork(uint8_t networkID) {
+  _networkID = networkID;
   writeReg(REG_SYNCVALUE2, networkID);
 }
 
+uint8_t RFM69::getNetwork() {
+  return _networkID;
+}
+
 // set user's ISR callback
 void RFM69::setIsrCallback(void (*callback)()) { 
   _isrCallback = callback;
@@ -263,8 +285,38 @@ void RFM69::setPowerLevel(uint8_t powerLevel) {
   writeReg(REG_PALEVEL, PA_SETTING | powerLevel);
 }
 
-// return stored _powerLevel
-uint8_t RFM69::getPowerLevel() { return _powerLevel; }
+uint8_t RFM69::getOutputPower() {
+  // _RegisterBits(_REG_PA_LEVEL, offset=0, bits=5)
+  return readReg(REG_PALEVEL) & 0x1F;
+}
+
+uint8_t RFM69::getPowerLevel() {
+  uint8_t val = readReg(REG_PALEVEL);
+  uint8_t outputPower = getOutputPower();
+
+  bool pa0 = (val & 0b10000000) > 0;
+  bool pa1 = (val & 0b01000000) > 0;
+  bool pa2 = (val & 0b00100000) > 0;
+
+  if (pa0 && !pa1 && !pa2) {
+    // -18 to 13 dBm range
+    return -18 + outputPower;
+  }
+  if (!pa0 && pa1 && !pa2) {
+    // -2 to 13 dBm range
+    return -18 + outputPower;
+  }
+  if (!pa0 && pa1 && pa2 && !_isRFM69HW) {
+    // 2 to 17 dBm range
+    return -14 + outputPower;
+  }
+  if (!pa0 && pa1 && pa2 && _isRFM69HW) {
+    // 5 to 20 dBm range
+    return -11 + outputPower;
+  }
+
+  return 255;
+}
 
 // Set TX Output power in dBm:
 // [-18..+13]dBm in RFM69 W/CW
@@ -287,6 +339,10 @@ int8_t RFM69::setPowerDBm(int8_t dBm) {
   return dBm;
 }
 
+double RFM69::dBm_to_mW(uint8_t dBm) {
+  return pow(10, (dBm / 10.0));
+}
+
 bool RFM69::canSend() {
   if (_mode == RF69_MODE_RX && PAYLOADLEN == 0 && readRSSI() < CSMA_LIMIT) { // if signal stronger than -100dBm is detected assume channel activity
     setMode(RF69_MODE_STANDBY);
@@ -568,6 +624,26 @@ void RFM69::spyMode(bool onOff) {
   //writeReg(REG_PACKETCONFIG1, (readReg(REG_PACKETCONFIG1) & 0xF9) | (onOff ? RF_PACKET1_ADRSFILTERING_OFF : RF_PACKET1_ADRSFILTERING_NODEBROADCAST));
 }
 
+bool RFM69::getSpyMode() {
+  return _spyMode;
+}
+
+bool RFM69::isSyncOn() {
+  return readReg(REG_SYNCCONFIG) >> 7;
+}
+
+uint8_t RFM69::getSyncSize() {
+  return (readReg(REG_SYNCCONFIG) & 0b00111000) >> 3;
+}
+
+bool RFM69::isCrcOn() {
+  return (readReg(REG_PACKETCONFIG1) & 0b00010000) >> 4;
+}
+
+bool RFM69::isAesOn() {
+  return readReg(REG_PACKETCONFIG2) & 0b00000001;
+}
+
 // for RFM69 HW/HCW only: you must call setHighPower(true) after initialize() or else transmission won't work
 void RFM69::setHighPower(bool _isRFM69HW_HCW) {
   _isRFM69HW = _isRFM69HW_HCW;
@@ -575,6 +651,10 @@ void RFM69::setHighPower(bool _isRFM69HW_HCW) {
   setPowerLevel(_powerLevel);
 }
 
+bool RFM69::isHighPower() {
+ return _isRFM69HW;
+}
+
 // internal function - for HW/HCW only:
 // enables HiPower for 18-20dBm output
 // should only be used with PA1+PA2

RFM69.h

@@ -163,6 +163,7 @@
 #define RF69_BROADCAST_ADDR     0
 #define RF69_CSMA_LIMIT_MS      1000
 #define RF69_TX_LIMIT_MS        1000
+#define RF69_FXOSC              32000000L
 #define RF69_FSTEP              61.03515625 // == FXOSC / 2^19 = 32MHz / 2^19 (p13 in datasheet)
 
 // TWS: define CTLbyte bits
@@ -201,7 +202,10 @@ class RFM69 {
     RFM69(uint8_t slaveSelectPin=RF69_SPI_CS, uint8_t interruptPin=RF69_IRQ_PIN, bool isRFM69HW_HCW=false, SPIClass *spi=nullptr);
 
     bool initialize(uint8_t freqBand, uint16_t ID, uint8_t networkID=1);
+    uint8_t getVersion();
+    uint16_t getAddress();
     void setAddress(uint16_t addr);
+    uint8_t getNetwork();
     void setNetwork(uint8_t networkID);
     void setIsrCallback(void (*callback)());
     virtual bool canSend();
@@ -213,17 +217,27 @@ class RFM69 {
     virtual void sendACK(const void* buffer = "", uint8_t bufferSize=0);
     uint32_t getFrequency();
     void setFrequency(uint32_t freqHz);
+    uint32_t getFrequencyDeviation();
+    uint32_t getBitRate();
     void encrypt(const char* key);
     void setCS(uint8_t newSPISlaveSelect);
     bool setIrq(uint8_t newIRQPin);
     int16_t readRSSI(bool forceTrigger=false); // *current* signal strength indicator; e.g. < -90dBm says the frequency channel is free + ready to transmit
+    bool getSpyMode();
     void spyMode(bool onOff=true);
+    bool isSyncOn();
+    uint8_t getSyncSize();
+    bool isCrcOn();
+    bool isAesOn();
     //void promiscuous(bool onOff=true); // replaced with spyMode()
     virtual void setHighPower(bool _isRFM69HW_HCW=true); // has to be called after initialize() for RFM69 HW/HCW
+    bool isHighPower();
     virtual void setPowerLevel(uint8_t level); // reduce/increase transmit power level
     virtual int8_t setPowerDBm(int8_t dBm); // reduce/increase transmit power level, in dBm
+    double dBm_to_mW(uint8_t dBm); // convert dBm to mW
 
-    virtual uint8_t getPowerLevel(); // get powerLevel	
+    uint8_t getOutputPower();
+    uint8_t getPowerLevel(); // get powerLevel
     void sleep();
     uint8_t readTemperature(uint8_t calFactor=0); // get CMOS temperature (8bit)
     void rcCalibration(); // calibrate the internal RC oscillator for use in wide temperature variations - see datasheet section [4.3.5. RC Timer Accuracy]
@@ -258,6 +272,7 @@ class RFM69 {
     uint8_t _interruptPin;
     uint8_t _interruptNum;
     uint16_t _address;
+    uint8_t _networkID;
     bool _spyMode;
     uint8_t _powerLevel;
     bool _isRFM69HW;
@@ -319,7 +334,6 @@ class RFM69 {
     // Save these so we can reinitialize the radio after sending a burst
     // or exiting listen mode.
     uint8_t _freqBand;
-    uint8_t _networkID;
     uint8_t _rxListenCoef;
     uint8_t _rxListenResolution;
     uint8_t _idleListenCoef;

RFM69_ATC.cpp

@@ -174,6 +174,10 @@ void  RFM69_ATC::enableAutoPower(int16_t targetRSSI){    // TomWS1: New method t
   _targetRSSI = targetRSSI;         // no logic here, just set the value (if non-zero, then enabled), caller's responsibility to use a reasonable value
 }
 
+int16_t RFM69_ATC::getTargetRssi() {
+  return _targetRSSI;
+}
+
 //=============================================================================
 // getAckRSSI() - returns the RSSI value ack'd by the far end.
 //=============================================================================

RFM69_ATC.h

@@ -44,6 +44,7 @@ class RFM69_ATC: public RFM69 {
     void sendACK(const void* buffer = "", uint8_t bufferSize=0);
     bool sendWithRetry(uint16_t toAddress, const void* buffer, uint8_t bufferSize, uint8_t retries=2, uint8_t retryWaitTime=RFM69_ACK_TIMEOUT);
     void enableAutoPower(int16_t targetRSSI=-90);  // TWS: New method to enable/disable auto Power control
+    int16_t getTargetRssi();
 
     int16_t getAckRSSI(void);       // TWS: New method to retrieve the ack'd RSSI (if any)
     int16_t _targetRSSI;     // if non-zero then this is the desired end point RSSI for our transmission