Cansat
/
RFM69_LowPowerLab
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

remove PiGateway_withLCD example

This commit is contained in:
Felix Rusu 2020-04-16 09:58:08 -04:00
parent 9bd3608a2a
commit 1d3489b78d
2 changed files with 3 additions and 225 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
.travis.yml
View File

@ -22,7 +22,6 @@ env:
- PLATFORMIO_CI_SRC=Examples/Node
- PLATFORMIO_CI_SRC=Examples/OLEDMote
- PLATFORMIO_CI_SRC=Examples/PiGateway/PiGateway.ino
# - PLATFORMIO_CI_SRC=Examples/PiGateway/PiGateway_withLCD.ino
- PLATFORMIO_CI_SRC=Examples/PulseMeter
- PLATFORMIO_CI_SRC=Examples/RandomNumbers
- PLATFORMIO_CI_SRC=Examples/SonarMote/SonarMote_DistanceReader/SonarMote_DistanceReader.ino
@ -53,12 +52,10 @@ install:
# http://platformio.org/#!/lib/show/532/BMP180
# http://platformio.org/#!/lib/show/536/Si7021
# http://platformio.org/#!/lib/show/684/Sparkfun BME280
# https://platformio.org/lib/show/560/Streaming
# https://platformio.org/lib/show/6230/PString-Arduino-lib
- platformio lib install 7 38 125 131 136 176 531 532 536 684
#- wget https://bitbucket.org/fmalpartida/st7036-display-driver/downloads/LCD_%20ST7036_v1.2.0.zip -O /tmp/st7036_source.zip
#- unzip /tmp/st7036_source.zip -d /tmp/
- platformio lib install 7 38 125 131 136 176 531 532 536 684 560 6230
script:
#- platformio ci --board=moteino --lib=. --lib="/tmp/LCD_C0220BIZ"
- platformio ci --board=moteino --lib=.

219
Examples/PiGateway/PiGateway_withLCD.ino
View File

@ -1,219 +0,0 @@
// **********************************************************************************************************
// Moteino gateway/base sketch that works with Moteinos equipped with RFM69W/RFM69HW/RFM69CW/RFM69HCW
// This sketch uses a 2x20 Newhaven RGB backlight LCD to display incoming messages from end nodes
// http://www.digikey.com/product-search/en?keywords=NHD-C0220BIZ-FS(RGB)-FBW-3VM
// This is a basic gateway sketch that receives packets from end node Moteinos, formats them as ASCII strings
// with the end node [ID] and passes them to Pi/host computer via serial port
// (ex: "messageFromNode" from node 123 gets passed to serial as "[123] messageFromNode")
// It also listens to serial messages that should be sent to listening end nodes
// (ex: "123:messageToNode" sends "messageToNode" to node 123)
// Make sure to adjust the settings to match your transceiver settings (frequency, HW etc).
// **********************************************************************************
// Copyright Felix Rusu 2016, http://www.LowPowerLab.com/contact
// **********************************************************************************
// License
// **********************************************************************************
// This program is free software; you can redistribute it
// and/or modify it under the terms of the GNU General
// Public License as published by the Free Software
// Foundation; either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will
// be useful, but WITHOUT ANY WARRANTY; without even the
// implied warranty of MERCHANTABILITY or FITNESS FOR A
// PARTICULAR PURPOSE. See the GNU General Public
// License for more details.
// Licence can be viewed at
// http://www.gnu.org/licenses/gpl-3.0.txt
//
// Please maintain this license information along with authorship
// and copyright notices in any redistribution of this code
// **********************************************************************************
#include <RFM69.h> //get it here: https://github.com/lowpowerlab/rfm69
#include <RFM69_ATC.h> //get it here: https://github.com/lowpowerlab/RFM69
#include <RFM69_OTA.h> //get it here: https://github.com/lowpowerlab/RFM69
#include <SPIFlash.h> //get it here: https://github.com/lowpowerlab/spiflash
#include <SPI.h> //included with Arduino IDE (www.arduino.cc)
#include <Wire.h> //included with Arduino IDE (www.arduino.cc)
#include "ST7036.h" //get it from here: https://bitbucket.org/fmalpartida/st7036-display-driver/src/
#include "LCD_C0220BiZ.h" //get it from here: https://bitbucket.org/fmalpartida/st7036-display-driver/src/
//****************************************************************************************************************
//**** IMPORTANT RADIO SETTINGS - YOU MUST CHANGE/CONFIGURE TO MATCH YOUR HARDWARE TRANSCEIVER CONFIGURATION! ****
//****************************************************************************************************************
#define NODEID 1 //the ID of this node
#define NETWORKID 200 //the network ID of all nodes this node listens/talks to
#define FREQUENCY RF69_915MHZ //Match this with the version of your Moteino! (others: RF69_433MHZ, RF69_868MHZ)
#define ENCRYPTKEY "sampleEncryptKey" //identical 16 characters/bytes on all nodes, not more not less!
#define IS_RFM69HW_HCW //uncomment only for RFM69HW/HCW! Leave out if you have RFM69W/CW!
#define ACK_TIME 30 // # of ms to wait for an ack
//*****************************************************************************************************************************
#define ENABLE_ATC //comment out this line to disable AUTO TRANSMISSION CONTROL
#define ATC_RSSI -75 //target RSSI for RFM69_ATC (recommended > -80)
//*****************************************************************************************************************************
// Serial baud rate must match your Pi/host computer serial port baud rate!
#define SERIAL_EN //comment out if you don't want any serial verbose output
#define SERIAL_BAUD 19200
//*****************************************************************************************************************************
#define BACKLIGHTPIN 5 //3=R,5=G,6=B
#ifdef __AVR_ATmega1284P__
#define LED 15 // Moteino MEGAs have LEDs on D15
#define FLASH_SS 23 // and FLASH SS on D23
#else
#define LED 9 // Moteinos have LEDs on D9
#define FLASH_SS 8 // and FLASH SS on D8
#endif
#ifdef SERIAL_EN
#define DEBUG(input) {Serial.print(input); delay(1);}
#define DEBUGln(input) {Serial.println(input); delay(1);}
#else
#define DEBUG(input);
#define DEBUGln(input);
#endif
#ifdef ENABLE_ATC
RFM69_ATC radio;
#else
RFM69 radio;
#endif
SPIFlash flash(FLASH_SS, 0xEF30); //EF40 for 16mbit windbond chip
//initialize LCD
ST7036 lcd = ST7036(2, 20, 0x78, BACKLIGHTPIN); //row count, column count, I2C addr, pin for backlight PWM
byte battChar[8] = {0b00000,0b01110,0b11111,0b11111,0b11111,0b11111,0b11111,0};
byte rssiChar[8] = {0b00000,0b00100,0b10101,0b01110,0b00100,0b00100,0b00100,0};
void setup() {
Serial.begin(SERIAL_BAUD);
delay(10);
radio.initialize(FREQUENCY,NODEID,NETWORKID);
#ifdef IS_RFM69HW_HCW
radio.setHighPower(); //must include this only for RFM69HW/HCW!
#endif
radio.encrypt(ENCRYPTKEY);
#ifdef ENABLE_ATC
radio.enableAutoPower(ATC_RSSI);
#endif
char buff[50];
sprintf(buff, "\nTransmitting at %d Mhz...", radio.getFrequency()/1000000);
DEBUGln(buff);
if (flash.initialize())
{
DEBUGln("SPI Flash Init OK!");
}
else
{
DEBUGln("SPI FlashMEM not found (is chip onboard?)");
}
lcd.init();
lcd.setContrast(10);
lcd.clear();
lcd.load_custom_character(0, battChar);
lcd.load_custom_character(1, rssiChar);
lcd.setCursor(0,0);
lcd.print(buff);
}
byte ackCount=0;
byte inputLen=0;
char input[64];
byte buff[61];
char LO[20];
char BAT[20];
char temp[25];
String inputstr;
void loop() {
inputLen = readSerialLine(input, 10, 64, 10); //readSerialLine(char* input, char endOfLineChar=10, byte maxLength=64, uint16_t timeout=10);
inputstr = String(input);
inputstr.toUpperCase();
if (inputLen > 0)
{
if (inputstr.equals("KEY?"))
{
DEBUG("ENCRYPTKEY:");
DEBUG(ENCRYPTKEY);
}
byte targetId = inputstr.toInt(); //extract ID if any
byte colonIndex = inputstr.indexOf(":"); //find position of first colon
if (targetId > 0) inputstr = inputstr.substring(colonIndex+1); //trim "ID:" if any
if (targetId > 0 && targetId != NODEID && targetId != RF69_BROADCAST_ADDR && colonIndex>0 && colonIndex<4 && inputstr.length()>0)
{
inputstr.getBytes(buff, 61);
//DEBUGln((char*)buff);
//DEBUGln(targetId);
//DEBUGln(colonIndex);
if (radio.sendWithRetry(targetId, buff, inputstr.length()))
{
DEBUGln("ACK:OK");
}
else
DEBUGln("ACK:NOK");
}
}
if (radio.receiveDone())
{
int rssi = radio.RSSI;
DEBUG('[');DEBUG(radio.SENDERID);DEBUG("] ");
if (radio.DATALEN > 0)
{
for (byte i = 0; i < radio.DATALEN; i++)
DEBUG((char)radio.DATA[i]);
DEBUG(" [RSSI:");DEBUG(rssi);DEBUG("]");
}
CheckForWirelessHEX(radio, flash, false); //non verbose DEBUG
if (radio.ACKRequested())
{
byte theNodeID = radio.SENDERID;
radio.sendACK();
DEBUG("[ACK-sent]");
}
DEBUGln();
Blink(LED,3);
lcd.clear();
lcd.setCursor(0,0);
//if (radio.DATALEN < RF69_MAX_DATA_LEN) radio.DATA[radio.DATALEN]=0;
byte matches = sscanf((const char*)radio.DATA, "%s BAT:%s", LO, BAT);
if (matches==2)
{
lcd.print(LO);
lcd.setCursor(0,14);
lcd.print(char(0));
lcd.setCursor(0,15);
lcd.print(BAT);
}
else lcd.print((const char*)radio.DATA);
lcd.setCursor(1,14);
lcd.print(char(1));
lcd.setCursor(1,16);
lcd.print(rssi);
}
}
void Blink(byte PIN, int DELAY_MS)
{
pinMode(PIN, OUTPUT);
digitalWrite(PIN,HIGH);
delay(DELAY_MS);
digitalWrite(PIN,LOW);
}