273 lines
7.7 KiB
C++
273 lines
7.7 KiB
C++
/**
|
|
* @file DShotRMT.cpp
|
|
* @brief DShot signal generation using ESP32 RMT with continuous repeat and pause between frames, including BiDirectional support
|
|
* @author Wastl Kraus
|
|
* @date 2025-06-11
|
|
* @license MIT
|
|
*/
|
|
|
|
#include <DShotRMT.h>
|
|
|
|
// --- DShotRMT Class ---
|
|
// This class provides an abstraction for sending and optionally receiving DShot frames.
|
|
// It uses ESP32's RMT peripheral for precise timing control, including BiDirectional RX.
|
|
|
|
DShotRMT::DShotRMT(gpio_num_t gpio, dshot_mode_t mode, bool isBidirectional, uint8_t pauseDuration)
|
|
: _gpio(gpio), _mode(mode), _isBidirectional(isBidirectional), _pauseDuration(pauseDuration) {}
|
|
|
|
// Initializes RMT TX and RX channels and encoder configuration
|
|
void DShotRMT::begin()
|
|
{
|
|
// Configure RX RMT Channel for BiDirectional DShot
|
|
if (_isBidirectional)
|
|
{
|
|
_rmt_rx_channel_config = {
|
|
.gpio_num = _gpio,
|
|
.clk_src = DSHOT_CLOCK_SRC_DEFAULT,
|
|
.resolution_hz = DSHOT_RMT_RESOLUTION,
|
|
.mem_block_symbols = 64,
|
|
};
|
|
|
|
if (rmt_new_rx_channel(&_rmt_rx_channel_config, &_rmt_rx_channel) != 0)
|
|
{
|
|
Serial.println("Failed to create RX channel");
|
|
return;
|
|
}
|
|
if (rmt_enable(_rmt_rx_channel) != 0)
|
|
{
|
|
Serial.println("Failed to enable RX channel");
|
|
return;
|
|
}
|
|
|
|
_receive_config.signal_range_min_ns = 300;
|
|
_receive_config.signal_range_max_ns = 5000;
|
|
}
|
|
|
|
// Configure TX RMT Channel
|
|
_rmt_tx_channel_config = {
|
|
.gpio_num = _gpio,
|
|
.clk_src = DSHOT_CLOCK_SRC_DEFAULT,
|
|
.resolution_hz = DSHOT_RMT_RESOLUTION,
|
|
.mem_block_symbols = 64,
|
|
.trans_queue_depth = 10,
|
|
};
|
|
|
|
// Transmission configuration
|
|
_transmit_config.loop_count = 0;
|
|
_transmit_config.flags.eot_level = _isBidirectional;
|
|
|
|
if (rmt_new_tx_channel(&_rmt_tx_channel_config, &_rmt_tx_channel) != 0)
|
|
{
|
|
Serial.println("Failed to create TX channel");
|
|
return;
|
|
}
|
|
if (rmt_enable(_rmt_tx_channel) != 0)
|
|
{
|
|
Serial.println("Failed to enable TX channel");
|
|
return;
|
|
}
|
|
|
|
// Create copy encoder for raw symbol transmission
|
|
if (!_dshot_encoder)
|
|
{
|
|
rmt_copy_encoder_config_t enc_cfg = {};
|
|
if (rmt_new_copy_encoder(&enc_cfg, &_dshot_encoder) != 0)
|
|
{
|
|
Serial.println("Failed to create copy encoder");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Encodes and transmits a valid DShot throttle value (48 - 2047)
|
|
void DShotRMT::setThrottle(uint16_t throttle)
|
|
{
|
|
// Clamp input range and mask to 11 bits
|
|
throttle = constrain(throttle, DSHOT_THROTTLE_MIN, DSHOT_THROTTLE_MAX) & 0x7FF;
|
|
|
|
_lastThrottle = throttle;
|
|
|
|
// Convert throttle value to DShot packet format
|
|
_tx_packet = assambleDShotPaket(_lastThrottle);
|
|
|
|
// Encode RMT symbols
|
|
size_t count = 0;
|
|
encodeDShotTX(_tx_packet, _tx_symbols, count);
|
|
|
|
// Transmit the packet
|
|
if (rmt_transmit(_rmt_tx_channel, _dshot_encoder, _tx_symbols, count * sizeof(rmt_symbol_word_t), &_transmit_config) != 0)
|
|
{
|
|
Serial.println("Failed to transmit DShot packet");
|
|
return;
|
|
}
|
|
|
|
// Pause between frames
|
|
esp_rom_delay_us(_pauseDuration);
|
|
}
|
|
|
|
// Receives and decodes a response frame from ESC containing eRPM info
|
|
uint32_t DShotRMT::getERPM()
|
|
{
|
|
if (_isBidirectional)
|
|
{
|
|
if (_rmt_rx_channel == nullptr)
|
|
Serial.println("No bidirectional DShot support.");
|
|
return _last_erpm;
|
|
|
|
// Try to receive a new frame
|
|
if (!rmt_receive(_rmt_rx_channel, _rx_symbols, sizeof(_rx_symbols), &_receive_config))
|
|
Serial.println("No valid DShot frame received");
|
|
return _last_erpm;
|
|
|
|
_last_erpm = decodeDShotRX(_rx_symbols, DSHOT_BITS_PER_FRAME);
|
|
return _last_erpm;
|
|
}
|
|
|
|
// No RX possible in non-bidirectional mode
|
|
return _last_erpm;
|
|
}
|
|
|
|
// Converts eRPM value to RPM using magnet count
|
|
uint32_t DShotRMT::getMotorRPM(uint8_t magnet_count)
|
|
{
|
|
uint8_t pole_count = magnet_count / 2;
|
|
if (pole_count == 0)
|
|
pole_count = 1;
|
|
|
|
return getERPM() / pole_count;
|
|
}
|
|
|
|
// Calculates CRC for DShot packet
|
|
uint16_t DShotRMT::calculateCRC(uint16_t dshot_packet)
|
|
{
|
|
uint16_t packet = (dshot_packet << 1) | (_isBidirectional ? 1 : 0);
|
|
|
|
// Reset CRC container
|
|
_packet_crc = DSHOT_NULL_PACKET;
|
|
|
|
// CRC calculation for DShot (4 bits)
|
|
_packet_crc = ((packet ^ (packet >> 4) ^ (packet >> 8)) & 0xF);
|
|
|
|
// CRC is inverted for bidirectional DShot
|
|
if (_isBidirectional)
|
|
_packet_crc = (~_packet_crc) & 0xF;
|
|
|
|
return _packet_crc;
|
|
}
|
|
|
|
// Assembles DShot packet (11 bit throttle + 1 bit telemetry request + 4 bit CRC)
|
|
uint16_t DShotRMT::assambleDShotPaket(uint16_t value)
|
|
{
|
|
uint16_t throttle = value & 0x7FF;
|
|
|
|
// Reset packet container
|
|
_tx_packet = DSHOT_NULL_PACKET;
|
|
|
|
// Assemble raw DShot packet and add checksum
|
|
_packet_crc = calculateCRC(throttle);
|
|
|
|
_tx_packet = (throttle << 1) | (_isBidirectional ? 1 : 0);
|
|
_tx_packet = (_tx_packet << 4) | _packet_crc;
|
|
|
|
return _tx_packet;
|
|
}
|
|
|
|
// Converts a 16-bit packet into a valid DShot frame for RMT
|
|
void DShotRMT::encodeDShotTX(uint16_t dshot_packet, rmt_symbol_word_t *symbols, size_t &count)
|
|
{
|
|
count = 0;
|
|
|
|
uint32_t ticks_per_bit = 0;
|
|
uint32_t ticks_zero_high = 0;
|
|
uint32_t ticks_one_high = 0;
|
|
|
|
// Select timing based on DShot mode
|
|
switch (_mode)
|
|
{
|
|
case DSHOT150:
|
|
ticks_per_bit = 64;
|
|
ticks_zero_high = 24;
|
|
ticks_one_high = 48;
|
|
break;
|
|
case DSHOT300:
|
|
ticks_per_bit = 32;
|
|
ticks_zero_high = 12;
|
|
ticks_one_high = 24;
|
|
break;
|
|
case DSHOT600:
|
|
ticks_per_bit = 16;
|
|
ticks_zero_high = 6;
|
|
ticks_one_high = 12;
|
|
break;
|
|
case DSHOT1200:
|
|
ticks_per_bit = 8;
|
|
ticks_zero_high = 3;
|
|
ticks_one_high = 6;
|
|
break;
|
|
case DSHOT_OFF:
|
|
default:
|
|
ticks_per_bit = 0;
|
|
ticks_zero_high = 0;
|
|
ticks_one_high = 0;
|
|
break;
|
|
}
|
|
|
|
uint32_t ticks_zero_low = ticks_per_bit - ticks_zero_high;
|
|
uint32_t ticks_one_low = ticks_per_bit - ticks_one_high;
|
|
|
|
// Fill the 16 DShot bits array with selected timings
|
|
for (int i = 15; i >= 0; i--)
|
|
{
|
|
bool bit = (dshot_packet >> i) & 0x1;
|
|
if (_isBidirectional)
|
|
{
|
|
symbols[count].level0 = 0;
|
|
symbols[count].duration0 = bit ? ticks_one_high : ticks_zero_high;
|
|
symbols[count].level1 = 1;
|
|
symbols[count].duration1 = bit ? ticks_one_low : ticks_zero_low;
|
|
}
|
|
else
|
|
{
|
|
symbols[count].level0 = 1;
|
|
symbols[count].duration0 = bit ? ticks_one_high : ticks_zero_high;
|
|
symbols[count].level1 = 0;
|
|
symbols[count].duration1 = bit ? ticks_one_low : ticks_zero_low;
|
|
}
|
|
count++;
|
|
}
|
|
}
|
|
|
|
// Decodes a response frame from ESC containing eRPM info
|
|
uint16_t DShotRMT::decodeDShotRX(const rmt_symbol_word_t *symbols, uint32_t count)
|
|
{
|
|
uint16_t received_frame = DSHOT_NULL_PACKET;
|
|
|
|
// Build the frame bit by bit
|
|
for (size_t i = 0; i < DSHOT_BITS_PER_FRAME && i < count; ++i)
|
|
{
|
|
bool bit = (symbols[i].duration0 < symbols[i].duration1);
|
|
received_frame = (received_frame << 1) | bit;
|
|
}
|
|
|
|
// Extract CRC and payload
|
|
uint16_t payload = received_frame >> 4;
|
|
uint8_t crc_received = received_frame & 0xF;
|
|
|
|
// Calculate CRC for received frame
|
|
uint8_t crc_calculated = (payload ^ (payload >> 4) ^ (payload >> 8)) & 0xF;
|
|
if (_isBidirectional)
|
|
crc_calculated = (~crc_calculated) & 0xF;
|
|
|
|
// Check CRC
|
|
if (crc_received != crc_calculated)
|
|
{
|
|
Serial.println("RX - CRC check failed.");
|
|
return _last_erpm;
|
|
}
|
|
|
|
// Remove telemetry bit, keep raw value
|
|
uint16_t raw = payload >> 1;
|
|
|
|
return _last_erpm = raw;
|
|
}
|