DShotRMT - ESP32 Library (Rewrite for ESP-IDF 5)

This is a complete rewrite of the original DShotRMT library to support the new ESP-IDF 5 RMT encoder API (rmt_tx.h).
The library sends continuous DShot frames with a configurable pause between them and supports all standard DShot modes (150, 300, 600).

Now with BiDirectional DShot Support!!!

The old Version without encoding (rmt.h) is still available by using "oldAPI" Branch.

---

The DShot Protocol

The DShot protocol transmits 16-bit packets to brushless ESCs:

• 11-bit throttle value
• 1-bit telemetry request
• 4-bit checksum

Data is transmitted MSB-first. Pulse timing depends on the selected DShot mode.

DSHOT	Bitrate	TH1	TH0	Bit Time (µs)	Frame Time (µs)
150	150 kbit/s	5.00	2.50	6.67	~106.72
300	300 kbit/s	2.50	1.25	3.33	~53.28
600	600 kbit/s	1.25	0.625	1.67	~26.72

Each frame is followed by a 21-bit time pause. This helps ESCs detect separate frames.

---

Checksum Calculation

The checksum is calculated over the first 12 bits (throttle + bit):

crc = (value ^ (value >> 4) ^ (value >> 8)) & 0x0F;

Bidirectional DSHOT

Bidirectional DSHOT is also known as inverted DSHOT, because the signal level is inverted, so 1 is low and a 0 is high. This is done in order to let the ESC know, that we are operating in bidirectional mode and that it should be sending back telemetry packages.

Calculating the Bidirectional CRC

The calculation of the checksum is basically the same as before, but the inverted:

crc = (~(value ^ (value >> 4) ^ (value >> 8))) & 0x0F;

---

RMT on the ESP32

The RMT (Remote Control) is a peripheral designed to generate accurate and stable signals to control external devices such as LEDs, motors, and other peripherals. It is well suited for generating the DShot signals in a high-performance and accurate way on the ESP32 platform.

Advantages:

• Hardware-timed pulses
• CPU-independent signal generation
• Loop mode with inter-frame pause
• Reliable under system load

---

About This Library

This C++ library provides a simple class to generate DShot signals using any RMT-capable GPIO.
It uses a copy_encoder to continuously send a prebuilt symbol buffer. New throttle values are applied only when they change.

Supported Modes (optional BiDirectional):

• DSHOT150
• DSHOT300 (default)
• DSHOT600

Frame Structure:

• 16-bit DShot data
• 21-bit times worth of pause

---

References

• DSHOT – the missing Handbook
• DSHOT in the Dark
• ESP32 Technical Reference Manual

---

License

MIT License – see LICENSE

---

Author

Wastl Kraus
GitHub: @derdoktor667
Website: wir-sind-die-matrix.de