diff --git a/DShotRMT.cpp b/DShotRMT.cpp
index 4524a76..819e414 100644
--- a/DShotRMT.cpp
+++ b/DShotRMT.cpp
@@ -113,7 +113,8 @@ bool DShotRMT::begin(dshot_mode_t dshot_mode, bool is_bidirectional)
 }
 
 // ...the config part is done, now the calculating and sending part
-void DShotRMT::sendThrottleValue(uint16_t throttle_value, telemetric_request_t telemetric_request)
+// void DShotRMT::sendThrottleValue(uint16_t throttle_value, telemetric_request_t telemetric_request)
+void DShotRMT::sendThrottleValue(uint16_t throttle_value)
 {
     dshot_packet_t dshot_rmt_packet = {};
 
@@ -129,8 +130,9 @@ void DShotRMT::sendThrottleValue(uint16_t throttle_value, telemetric_request_t t
 
     // ...packets are the same for bidirectional mode
     dshot_rmt_packet.throttle_value = throttle_value;
-    dshot_rmt_packet.telemetric_request = telemetric_request;
-    dshot_rmt_packet.checksum = this->calculateCRC(dshot_rmt_packet);
+    // dshot_rmt_packet.telemetric_request = telemetric_request;
+    dshot_rmt_packet.telemetric_request = NO_TELEMETRIC;
+    dshot_rmt_packet.checksum = calculateCRC(dshot_rmt_packet);
 
     sendRmtPaket(dshot_rmt_packet);
 }
diff --git a/DShotRMT.h b/DShotRMT.h
index 4f5810b..7da5d92 100644
--- a/DShotRMT.h
+++ b/DShotRMT.h
@@ -108,7 +108,8 @@ public:
     // The sendThrottleValue() function sends a DShot packet with a given
     // throttle value (between 0 and 2047) and an optional telemetry
     // request flag.
-    void sendThrottleValue(uint16_t throttle_value, telemetric_request_t telemetric_request = NO_TELEMETRIC);
+    // void sendThrottleValue(uint16_t throttle_value, telemetric_request_t telemetric_request = NO_TELEMETRIC);
+    void sendThrottleValue(uint16_t throttle_value);
 
 private:
     rmt_item32_t dshot_tx_rmt_item[DSHOT_PACKET_LENGTH]; // An array of RMT items used to send a DShot packet.
diff --git a/examples/dshot300/dshot300.ino b/examples/dshot300/dshot300.ino
index 3eeada5..7fccb66 100644
--- a/examples/dshot300/dshot300.ino
+++ b/examples/dshot300/dshot300.ino
@@ -1,57 +1,54 @@
-// ...some very simple DShot example generating a DShot300 signal.
+/*
+ * Title: dshot300.ino
+ * Author: derdoktor667
+ * Date: 2023-04-13
+ * Description: A simple example of using the DShotRMT library to
+ * generate a DShot300 signal for a motor using an Arduino board.
+ */
+
 #include <Arduino.h>
 #include "DShotRMT.h"
 
-// Define USB serial port if available
-#ifdef SERIAL
-#define USB_Serial Serial
+// USB serial port needed for this example
 constexpr auto USB_SERIAL_BAUD = 115200;
-#endif // SERIAL
+#define USB_Serial Serial
 
-// Define motor pin and DShot protocol
-constexpr auto MOTOR_PIN = GPIO_NUM_4;
+// Define the GPIO pin connected to the motor and the DShot protocol used
+constexpr auto MOTOR01_PIN = GPIO_NUM_4;
 constexpr auto DSHOT_MODE = DSHOT300;
 
-// Define failsafe and initial throttle value
-constexpr auto FAILSAFE_THROTTLE = 0x3E7;
-constexpr auto INITIAL_THROTTLE = 0x30;
+// Define the failsafe and initial throttle values
+constexpr auto FAILSAFE_THROTTLE = 999;
+constexpr auto INITIAL_THROTTLE = 48;
 
-// Initialize DShotRMT object for the motor
-DShotRMT motor01(MOTOR_PIN, RMT_CHANNEL_0);
+// Initialize a DShotRMT object for the motor
+DShotRMT motor01(MOTOR01_PIN, RMT_CHANNEL_0);
 
 void setup()
 {
-    // Start USB serial port
     USB_Serial.begin(USB_SERIAL_BAUD);
 
-    // Start DShot signal generation
+    // Start generating DShot signal for the motor
     motor01.begin(DSHOT_MODE);
 }
 
 void loop()
 {
-    // Read throttle value from serial input
+    // Read the throttle value from the USB serial input
     auto throttle_input = readSerialThrottle();
 
-    // Set the throttle value
+    // Set the throttle value to either the value received from the serial input or the failsafe throttle value
     auto throttle_value = (throttle_input > 0) ? throttle_input : FAILSAFE_THROTTLE;
 
     // Send the throttle value to the motor
     motor01.sendThrottleValue(throttle_value);
-
-    // Print the throttle value to the serial console
-    USB_Serial.println(throttle_value);
 }
 
-// Read throttle value from USB serial input
+// Read the throttle value from the USB serial input
 uint16_t readSerialThrottle()
 {
     if (USB_Serial.available() > 0)
     {
         return USB_Serial.readStringUntil('\n').toInt();
     }
-    else
-    {
-        return 0;
-    }
 }
diff --git a/keywords.txt b/keywords.txt
deleted file mode 100644
index 43090a4..0000000
--- a/keywords.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-#######################################
-# Syntax Coloring Map For DShot_Lib
-#######################################
-
-#######################################
-# Datatypes (KEYWORD1)
-#######################################
-DShotRMT	                    KEYWORD1
-dshot_mode_t                    KEYWORD1
-telemetric_request_t            KEYWORD1
-dshot_packet_t                  KEYWORD1
-dshot_name_t                    KEYWORD1
-dshot_config_t                  KEYWORD1
-
-#######################################
-# Methods and Functions (KEYWORD2)
-#######################################
-begin                           KEYWORD2
-sendThrottleValue	            KEYWORD2
-
-#######################################
-# Instances (KEYWORD2)
-#######################################
-
-#######################################
-# Constants (LITERAL1)
-#######################################
-DSHOT_CLK_DIVIDER           LITERAL1
-DSHOT_PACKET_LENGTH         LITERAL1
-DSHOT_THROTTLE_MIN          LITERAL1
-DSHOT_THROTTLE_MAX          LITERAL1
-DSHOT_NULL_PACKET           LITERAL1
-DSHOT_PAUSE                 LITERAL1
-DSHOT_PAUSE_BIDIRECTIONAL   LITERAL1
-DSHOT_PAUSE_BIT             LITERAL1
-F_CPU_RMT                   LITERAL1
-RMT_CYCLES_PER_SEC          LITERAL1
-RMT_CYCLES_PER_ESP_CYCLE    LITERAL1